Protector Pro Instruction Guide
Initial Protector Pro setup
LONEALERT User Guides
A call is coming
Display
SOS button
Power/End Call
Step 4) Check the Protector Pro
Power on the Protector Pro using the red end call
button.
After a short while, a mobile network should
appear on-screen. If an image of a SIM card
appears with a question mark, the SIM may not
be installed correctly. Once you have a mobile
network on screen, check that everything is set
up correctly by pressing the green call button to
create a timer.
(For more information on how
to use timers, view the next page).
Step 5) Covering the SIM card slot
In the LONEALERT device box, you will find a
small black sticker. Remove this and place it over
the SIM card slot on top of the rubber cover.
Ensure that it sticks and is flat, as this helps to
keep the SIM card slot free from dust.
Speaker
Sim Card Slot
Microphone
Strap hole
Cancel timer
Call/Answer
Set timer Check
Call service
Step 1) Open the SIM card slot
Ensure the Protector Pro is powered off and lay it
face up in front of you. At the bottom left side of
the device, there is a rubber cover - lift this up
from the bottom to reveal the SIM card slot.
Step 2) Insert the SIM card
Pop out the micro SIM card found within the box
and place it in the Protector Pro. On the back of
the Protector Pro is an image showing the correct
way of entering the SIM card - please ensure this
is followed correctly, otherwise the SIM will not be
read by the device.
Step 3) Closing the SIM card slot
Fold the rubber cover back over the slot and
ensure it is pressed in until it is flat and not
sticking out.
The Protector Pro is fully customisable - to change any settings, speak to your LONEALERT champion.
To download digital versions of our user guides,
either scan the QR code above, or head to:
https://www.lonealert.co.uk/lonealert-user-guides/
www.LONEALERT.co.uk
+44 (0)330 999 8484
430-0000
Document Reference:
437-2001
- Protector Pro Complete Guide
Turn man
down function
on/off
(Disabled by
default)
Please note: GPS location can take a few minutes to find you when you
power your Protector Pro up for the very first time. We suggest that before
use, you place it close to an external window or wear it outside for around
30 minutes.
