TS – My Remote Control Is Not Working
Author: CT
Contributors: JR,JJ,RR
Orig. date: 9/16/10
Revised: 5/28/2015
Objective:
To troubleshoot remote control issues for Elite 2-function Wireless Remote Control
Action
The Elite 2-function Wireless Remote Control (EL20) is
compatible with the following Elite Series models:
Elite Liberty
Elite 1
Elite 2
Elite 3
There are 2 parts to any Wireless Remote Control System; the
transmitter and the receiver. The transmitter for the Elite 2-
function Wireless Remote Control is also called a key fob as it
is designed to attach to a key chain. The receiver is installed
into the ball machine and connects to the back of the control
panel on the green circuit board.
EL20 Transmitter (Key Fob)
EL20 Receiver (installed)
Remote Control Receiver
The more common statements regarding a remote control not
functioning are…
“My remote control does not work from the other side of
the net”
“My remote control does not work at all”
This indicates one of the following:
The remote control switch is off
The battery in the transmitter is weak
There is interference in the signal
The remote control is faulty
The remote receiver antennae is stuck inside the receiver
Your remote is not connected
Step 1 – Replace Battery In Transmitter
a.
Check the key fob or transmitter, if the LED
indicator light is weak or not illuminating it
indicates the battery is low on power and the
battery needs to be replaced.
b.
To replace the battery in the transmitter
unscrew the screws on the back, note the
orientation of the battery before removing
the old one and then replace the battery.
c.
Press the sweep button to ensure the led
Back of EL20 Transmitter (key fob)
