![background image](http://html1.mh-extra.com/html/little-giant/safety-rails/safety-rails_user-instructions_1928881001.webp)
™
!
Make sure arms are fully locked before
use. Never attempt to adjust or reposition
SAFETY RAILS
while in use. Only use
SAFETY RAILS
on
LITTLE GIANT
ladders
with factory-installed tracks.
WARNING
Never lean ladder with
SAFETY RAILS
contacting wall in this mode. Do not
stand on top two rungs without
SAFETY
RAILS
arms installed in walkthrough
mode, and never work from top two rungs.
YOU CAN LOSE YOUR BALANCE.
SAFETY RAILS
are for stability only. Do not
lean, push or pull on them, which can cause
ladder to move.
WARNING
INSTALLATION:
WALKTHROUGH MODE:
1. Squeeze and hold main lock handle to retract locking pin.
2. Slide SAFETY RAILS arm on track and into desired position (walk-
through, standoff or storage).
3. Release handle and slide arm into position until pin fully locks inside
hole.
1. With ladder in its straight ladder mode and laid on
ground, install arms to siderail tracks, extending
past top of ladder. NOTE: Slide arms onto track
at end away from ladder’s feet (Fig. A).
2. Use extension locks to extend arms until they are
fully extended (Fig. B).
3. Make sure main lock handles and extension
locks are fully locked before use. Main lock
handle alignment can be confirmed with labels
on ladder’s rail (Fig. C).
4. Set ladder up as described on ladder’s labels, but
with top rung at or just below top support point
(Fig. D).
5. Grip SAFETY RAILS firmly as you reach top
of ladder, and as you step through onto roof or
elevated platform.
6. When remounting ladder from above, hold
SAFETY RAILS and turn to face ladder before
descending.
IMPORTANT: To remove arms from walkthrough mode,
you must lift up slightly to disengage safety lock
feature before unlocking main lock handles.
Main lock
handle
Tool hook
Extension
lock
Spring pins
Wall pad
Tracks
(lock holes)
(Walkthrough Mode)
(Standoff Mode)
(Storage Mode)
MAIN LOCK HANDLES
Press and hold
To unlock:
To lock:
Release
Pin retracts
Pin engages
EXTENSION LOCKS
A. Slide on
toward foot
B. Fully
extend
Read and follow all instructions on
SAFETY RAILS
and on ladder.
FAILURE TO DO SO COULD RESULT IN INJURY OR DEATH.
DANGER
C. Confirm lock alignment
Squeeze and hold
To unlock:
To lock:
Release
Pin retracts
Pin engages
D. Set top rung at
or just below top
support point
Top
support
point
Scan QR code to view
safety/instructional video
USER INSTRUCTIONS