STEP ONE
STEP TWO
STEP THREE
STEP FOUR
Once the podium has been unfolded,
locate and lock in the bottom and
top pins on the horizontal bracing
at the back of the podium as shown
in the diagram. If the top pin is
inaccessible from the ground, lock
in the top pin when the podium is
fully assembled and accessed for the
fi rst time. There is no safety risk when
doing this as the deck, ladder frame
and bottom pin keeps the podium
secure and free from any movement.
Attach the ladder frame to the front
of the podium ensuring that all
of the brace claws are locked into
position. The ladder can be used
to help square the podium.
LYTEPOD
ASSEMBLY
GUIDE
Lyte Industries (Wales) Ltd
LADDERS
I
TOWERS
www.lyteladders.co.uk
All our user guides are compiled in order to give the user step by step instructions to ensure the product
is assembled correctly and to the latest safety standard for use when working at height.
The law requires that anyone assembling and using a podium be competent to do so and should also have
a copy of the correct manufacturer’s instructions.
If you require further information on this, please call us on
01792 796666
.
Attach the platform to the
front of the podium ensuring
that all of the brace claws are
locked into position.
Attach stabilisers to the vertical
tubing at the back of the podium
as shown in the image.
If you are positioning the LytePOD
with the rear elevation against a
surface/wall or are applying a lateral
force from the back of the podium,
position both stabilisers at a 90 degree
angle which is perpendicular to the
podium. Fully tighten up the clamps
on each stabiliser and ensure both
are secure.
STEP FIVE
STEP SIX
If you are positioning the LytePOD
with the rear and side elevation against
a surface/wall or are applying a lateral
force from the back or side of the podium,
position stabiliser at a 90 degree angle
which is perpendicular to the podium.
Fully tighten up the clamp on the
stabiliser and ensure its secure
.
BS
8620
