Battery Charge:
This wireless headphone is powered by a rechargeable Li-ion battery.
When the battery is low the headphones will emit a sound to remind you to recharge it.
1. Insert USB charging cable into a suitable USB port for charging.
2. Connect the USB charging cable with the USB-C port on the headphone.
3. The LED indicator turns red to show battery is charging.
4. The LED indicator turns blue when battery is fully charged.
5. It takes about 2.5 hours to fully charge the headphone.
How to use this Headphone:
A. Power ON/OFF
B. Pairing the Headphone
1. When the headphone is switched on, it automatically enters pairing mode and the LED indicator will
flash blue and red. A voice prompt "The bluetooth device is ready to pair" can be heard.
2. On your device search for the pairing name: LEWTV4M
Once connected the voice prompt 'The bluetooth device is connected successfully' can be heard.
(Note: The headphones can also be connected directly via the 3.5mm audio cable).
LED indicator turns blue and the headphone issues
a voice prompt 'Power On'
Power ON
Slide towards the ON side
Power OFF
Slide towards the OFF side
LED indicator flashes red, then goes out
and headphone issues a voice prompt ‘Power Off’
Function
Operation
LED indicator
WI WIRED
HEADPHONES
LEWTV4M
Specifications:
Driver Size: 40mm
Impedance: 32 Ohm
Sensitivity: 93dB ± 3dB at 1kHz
Frequency Response: 20Hz - 20kHz
Wireless Range: 10m
Play Time: 12 Hours
Battery Size: 250mAh
Charge Time: 2.5 Hours
Included:
1 x Wireless Headphone
1 x USB to USB-C charging cable
1 x 3.5mm Audio cable - 4 metres
