![background image](http://html1.mh-extra.com/html/linear/ldco/ldco_quick-programming-manual_1921667001.webp)
LDCO
QUICK PROGRAMMING GUIDE
2 GREEN FLASHES = SET UP LIMIT
PRESS UP (+) OR DOWN (-)
TO JOG THE DOOR TO THE
CORRECT POSITION
PRESS LEARN & UP
FOR 3 SECONDS
PRESS LEARN TO STORE LIMIT
LEARN
DOWN -
UP +
SETTING THE OPEN LIMIT
NOTE: LIMITS ARE PRESET FOR 7-FOOT DOORS
2 GREEN FLASHES = OPEN LIMIT STORED
LEARN
DOWN -
UP +
LEARN
DOWN -
UP +
SETTING THE CLOSE LIMIT
2 RED FLASHES = SET DOWN LIMIT
PRESS UP (+) OR DOWN (-)
TO JOG THE DOOR TO THE
CORRECT POSITION
PRESS LEARN & DOWN
FOR 3 SECONDS
PRESS LEARN TO STORE LIMIT
LEARN
DOWN -
UP +
2 RED FLASHES = CLOSE LIMIT STORED
LEARN
DOWN -
UP +
LEARN
DOWN -
UP +
ADDING A TRANSMITTER OR KEYPAD CODE
RED LED WILL LIGHT FOR 15
SECONDS - READY TO LEARN
PUSH TRANSMITTER BUTTON OR
ENTER KEYPAD CODE
PRESS & RELEASE
LEARN BUTTON
LEARN
DOWN -
UP +
1 FLASH = TRANSMITTER BUTTON OR
KEYPAD CODE LEARNED
RED LED WILL LIGHT FOR 15
SECONDS - READY TO ERASE
PUSH TRANSMITTER BUTTON OR
ENTER KEYPAD CODE
PRESS & RELEASE
LEARN BUTTON
LEARN
DOWN -
UP +
4 FLASHES = TRANSMITTER BUTTON
OR KEYPAD CODE ERASED
ERASING A TRANSMITTER OR KEYPAD CODE
ERASING ALL TRANSMITTERS & KEYPADS
PRESS LEARN BUTTON
FOR 10 SECONDS
LEARN
DOWN -
UP +
3 FLASHES = ALL TRANSMITTERS &
KEYPADS ERASED
10
SEC.
SETTING THE DOOR FORCE
RUN THE OPERATOR FOUR
COMPLETE UP & DOWN CYCLES
THE OPERATOR AUTOMATICALLY
SETS THE CORRECT DOOR FORCE
FOR OPTIONAL OPEN AND CLOSE FORCE
MODIFICATIONS, SEE INSTRUCTIONS
USA & Canada Toll Free (800) 421-1587
or dial (760) 438-7000
www.linear-solutions.com