background image

D E C L A R ATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions : (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Equipment Classification :  FCC Class B Peripheral Device(JBP)

Type of Product (EUT) :  CD-R/RW Drive

Manufacturer :  LG Electronics Inc.

Address :  19-1, Cheongho-Ri, Jinwuy-Myon

Pyungtaek-Shi, kyunggi-Do, 451-713 Korea

Attention :  Mr. T.K.Lee - General Manager

Multimedia Standards Team

W e hereby declare that the equipment bearing the trade and model

number specified above was tested conforming to the applicable FCC

Rules under the most accurate measurement standards possible, and

that all the necessary steps have been taken and are in force to assure

that production units of the same equipment will continue to comply

with the Commission s requirements.

Trade Name/Model : LG or GoldStar/CED-8120B

Responsible Party : 

LG Electronics U.S.A. Inc.

Address: 

6133 N. River Road, Suite 1100

(Riverway Plaza) Rosemont, IL 60018

Contact Person : 

Mr. P. H. Byun, General Manager

Tel. No. (847) 993-4529

i

Summary of Contents for CED-8120B - - CD-RW Drive























Reviews: