PK-A3218-10-00-0B
For Technical Assistance Call: 1-800-824-3005 (U.S.A. Only)
1 800 405-5320 (Canada Only) www.leviton.com
PK-A3218-10-00-0B
INSTALLATION INSTRUCTIONS
Nos.
LP3xx-MC, LP4xx-MC
© 2018 Leviton Mfg. Co., Inc.
Outdoor Meter - Load Center Combination Enclosure
INSTALLATION
WARNING: TO AVOID FIRE, SHOCK OR
DEATH: TURN OFF POWER SUPPLYING
THIS EQUIPMENT, AND CONFIRM POWER
IS OFF,
before installing, removing or
servicing this equipment.
Step 1: Remove meter and wiring
compartment covers
(fig. 1)
a.
Remove
Meter cover (B)
by loosening
the
securing screw (J)
and sliding cover
down and out.
b.
Remove
wiring compartment cover (C)
by loosening the
securing screw (K)
and
sliding
security latch (A)
upward and
sliding cover out and down.
c.
Slide
wiring compartment cover (C)
up and out.
Step 2: Remove Load Center Door
(Optional)
NOTE:
The load center door can be removed for
easier installation.
a.
Lift
door (D)
upward to remove from
hinge (E)
(fig. 2)
.
b.
When installation is complete, align the
door
hinge (E)
with the hinge pin and insert
downward until door is seated.
Step 3: Bottom Feed Wiring
NOTE:
Before removing any knockouts from the
enclosure, consult the local electrical code to
determine the knockout requirements.
a.
To remove
knockouts (F)
, first strike the center
of the knockout.
b.
Pry each
ring (G)
up, one at a time, and grip
both ends with a pair of pliers.
c.
Use the pliers to bend the
rings (G)
until they
disconnect from the enclosure
(fig. 3)
.
Step 4: Enclosure Mounting
Surface Mounting
a.
Remove
deadfront (S)
by loosening the
securing
screw (T)
and lifting the
deadfront (S)
off the
enclsoure.
b.
Remove
mounting knockouts (H)
from the back
of the enclosure
(fig. 4).
c.
Use outdoor approved screws or nails (not
provided) in the
mounting knockouts (H)
to
secure the enclosure to the wall.
Fig. 1
Fig. 3
Fig. 2
Fig. 4
a.
b.
c.
IMPORTANT SAFETY INSTRUCTIONS -
READ ALL INSTRUCTIONS BEFORE USING.
PATENTS PENDING
LIMITED PRODUCT WARRANTY
For Leviton’s limited product warranty, go to
www.leviton.com
. For a printed copy of the warranty you may call
1-800-323-8920
.
WARNING
•
TO AVOID FIRE, SHOCK OR DEATH: TURN OFF POWER SUPPLYING THIS EQUIPMENT, AND CONFIRM POWER IS OFF,
before installing, removing or servicing this equipment.
• This equipment
MUST BE
installed and serviced by an electrician.
• Replace all doors and covers before connecting power to this equipment.
• To be installed and/or used in accordance with electrical codes and regulations.
Knockout
(F)
Ring
(G)
Ring
(E)
Mounting
Knockouts
(H)
Down
Meter
cover
(B)
Wiring
compartment
cover
(C)
Down
Out
Out
Hinge pin
Hinge (E)
Door (D)
Securing
latch (A)
Screw
(K)
Screw
(J)
Meter cover (B)
Wiring
compartment
cover (C)
WEB
VERSION
