The information contained herein is intended for the use of the individual(s) named above and those authorized to receive it. Dissemination, distribution
or copy of this information is strictly prohibited.
ASSEMBLY INSTRUCTIONS PLEASE READ CAREFULLY
Model No.
Inside
Dimensions
Outside
Dimensions
Recommended Concrete
Pad Dimensions
200D Series
30"W x 48"L x 40"H
33 3/4"W x 51 1/8"L x 43 1/4"H
44"W x 62"L x 6" Thick
200DS Series
48"W x 48"L x 44"H
51 3/4"W x 51 1/8"L x 47 1/4"H
62"W x 62"L x 6" Thick
300 Series
22"W x 72"L x 38"H
25 3/4"W x 75 1/8"L x 41 1/4"H
36"W x 86"L x 6" Thick
300D Series
48"W x 78"L x 44"H
51 3/4"W x 81 1/8"L x 47 1/4"H
62"W x 92"L x 6" Thick
300DS Series
48"W x 91"L x 44"H
51 3/4"W x 94 1/8"L x 47 1/4"H
62"W x 105"L x 6" Thick
300T Series
22"W x 72"L x 50"H
25 3/4"W x 75 1/8"L x 53 1/4"H
36"W x 86"L x 6" Thick
300TD Series
48"W x 78"L x 50"H
51 3/4"W x 81 1/8"L x 53 1/4"H
62"W x 92"L x 6" Thick
300TDS Series
48"W x 91"L x 50"H
51 3/4"W x 94 1/8"L x 53 1/4"H
62"W x 105"L x 6" Thick
400 Series
26"W x 86"L x 44"H
29 3/4"W x 89 1/8"L x 47 1/4"H
40"W x 100"L x 6" Thick
400T Series
26"W x 86"L x 54"H
29 3/4"W x 89 1/8"L x 57 1/4"H
40"W x 100"L x 6" Thick
600 Series
36"W x 100"L x 56"H
39 3/4"W x 103 1/8"L x 59 1/4"H
50"W x 114"L x 6" Thick
600T Series
36"W x 100"L x 64"H
39 3/4"W x 103 1/8"L x 67 1/4"H
50"W x 114"L x 6" Thick
600TM Series
36"W x 100"L x 70"H
39 3/4"W x 103 1/8"L x 73 1/4"H
50"W x 114"L x 6" Thick
600TS Series
38"W x 120"L x 64"H
41 3/4"W x 123 1/8"L x 67 1/4"H
52"W x 134"L x 6" Thick
1.
The concrete base should be 6” thick x 14” longer than enclosure ID x 14” wider than enclosure ID.
A.
Mark the concrete base for the outside of the enclosure (3” wider than ID and 3” longer than ID).
2.
The PVC masking film will help to protect the finish of the metal panels during installation. These
coatings should be left intact and removed only after assembly of the enclosure is complete.
A.
Assemble the “B-A-B” (side-end-side) assemblies using hex headed screws. (For best results, insert a
