Setup / Basic operation DVB-T:
1
Select DVB with the “Source” button
2
Press the “DVD/DVB setup” button
3
Select “Channel Setting” in the OSD menu by
navigating with the ”UP/DOWN/LEFT/RIGHT”buttons,
press the “Enter” button to confirm
4
Set “Scan Type” to “Auto Scan” (select as mentioned
above)
5
Select “Start Scan”, the unit will now search for all
avaIlable channels and save them.
6
Exit the menu with the “DVD/DVB menu” button
7
Select the channels with the “p/-“ button
Basic operation DVD/CD:
1
Select DVD with the “Source” button
2
Insert a DVD/CD (label facing away from you) into the
slot at the left side of the unit
The unit will pull in the disc by itself! So don’t push
3
Wait unil the unit shows you the disc menu or until it
starts to play the content automatically
4
Use the buttons on the remote or the buttons on the left
side of the unit to playback a DVD/CD
Please refer to the manual for a more detailed
explanation about the button functions.
In the following chapters the features Tv, DVB-T and DVD will
be explained
Setup / Basic operation TV:
1
Select TV with the “Source” button
2
Press the “TV setup menu” button repeatedly until
you get to the “TV menu”
3
Select “Auto Search” in the OSD menu by navigating
with the ”UP/DOWN”buttons, press the “RIGHT”
button to enter the auto search menu
4
Select “BG/DK/I” or “SECAM L”, PAL-BG is used for
most european countries (for more on this topic
please refer to chapter “OSD basic adjustment” in
the manual), then select yes and confirm with the
“Enter” button
5
When ready, exit the menu with the “TV setup
menu” button
6
Select the channels with the “p/-“ button
(backside of the unit)
2
Please refer to the manual for a more detailed description of how to
operate the unit or how to setup the unit to your personal taste.
7
Power
Source
TV setup menu
DVD/DVB setup
UP/DOWN/LEFT/RIGHT
Enter
Preparation / installation:
Connect the AC ADAPTER to a 230V. AC wall outlet and the
12V. DC input
(
7
)
of the unit.
Connect the antenna to the antenna input
(
2
)
of the unit.
Insert the batteries into the remotecontrol.
Press the “Power” button, the device is ready for use.
QUICK-GUIDE
DVT-194
