Get Prepared
FAQs Leica Lino ML
PAIRING XCRCatch
The ML 180 and the receiver should be paired already. However, if some problems occur with the connec-
tion between device and receiver, repeat the pairing procedure - follow the instructions below. (Take care
that you press all 3 buttons on the device simultaneously to switch it on...)
SMART TARGETING: LONG PRESS
How long should I press the Smart Targeting key?
Make sure, that the Smart Targeting key is pressed min.
2sec
– press it as long as 2 red LEDS start to blink on
the XCR Catch receiver. Now you can position the re-
ceiver on your target and the ML device starts to rotate so that the laser beam catches the
receiver. This can be done in a range of +/- 4°. (To set the device to 0° position, press
Smart Targeting key short.)
