1
Door
Door pocket
FD50-H SLIDING DOOR SYSTEM Installation Manual
(Recessed Mount Type for Pocket Door, with Two-way Soft Close)
Part No.FD50DHCP-PD
FOR YOUR SAFETY AND CORRECT INSTALLATION
Thank you for using our product. Before installation, please read this manual thoroughly to ensure correct installation.
Please keep this manual at hand for future reference.
ABOUT THE PRODUCT
●
This is a parts set for sliding door system for residential &
commercial use.
●
Built in soft closer enables two-way soft closing movement
in both direction.
●
Two sections of track for easy maintenance after installing.
SPECIFICATIONS
・
The closing speed of the soft closing type door may change
depending on the ambient temperature, operating method or
installation quality.
・
Recommended ambient temperature range is 5 to 40
䉝
※
1
When using a light weight door, you may feel the resistance of the
soft closer when opening the door.
Door height
Max. 2400 mm
2401 - 2700 mm
Door width
680
-
1500 mm
800
-
1500 mm
Min. Door thickness
30 mm
Max. Door weight
50
※
1
kg/door
Vertical adjustment
3 mm upward, 4 mm downward
Depth adjustment
±
2 mm
Warning :
Caution :
If not followed, injury or damage may result.
Prohibited
Warning
Caution
Required
Meaning of symbols
If not followed, death or serious injury may result.
Do not use this product for any other purpose, or with doors that are outside the specifications of this manual.
Do not disassemble or modify any parts other than those described in this document.
This product should be installed by a qualified person in accordance with this manual. If it is not installed correctly, the door
may fall and cause injury.
Provide a frame that can withstand the weight and impact of opening and closing the door. Be sure to use the specified
screws and tighten them securely. If the mounting strength is insufficient, the door may fall and cause injury.
If cutting any parts, make sure to remove any burrs before installation. Also check the upper track for any left-over burrs or
scraps and remove these.
Install the product with two people (in the case of one person, there is a risk of damaging components).
Follow the specified dimensions, specifications, and alignment of the door and frame. Warping, tilting or twisting of the
frame or door may cause failure.
This product is a part for architectural fittings. After installation, please check the function and safety of the final product.
Please inform the end user how to use the product safely.
Make sure to check the screws for slack at regular intervals (one month from first usage, half a year, and then one time
every year is recommended).
When installing the “pocket door”, make an “easy-maintenance” structure.
For example, use a removable panel.
