La Crosse EXECUTIVE ATOMIC CLOCK 3.0, Quick Start Manual

Page: 1 / 2

EXECUTIVE
ATOMIC CLOCK 3.0
MODEL: 513-21867 (513-1429BL)
POWER UP
WWVB ATOMIC TIME SIGNAL
1. Install 2 “AA” batteries into your Outdoor Sensor.
2. Insert the 5V power cord into an outlet, then into
your Atomic Clock. Optional: Insert 6 AA batteries
for backup.
Note:
Power cord is required for
constant backlight.
3. Once the sensor is reading to your clock, place
it outside in a shaded location to protect it from
the sun’s heat. See our mounting information:
bit.ly/temp_mounting
• The station will automatically search for the Atomic
Time Signal at power up and again at UTC 7:00,
8:00, 9:00, 10:00, and 11:00.
• Press and release the button to manually search
for the WWVB Atomic Time Signal.
• The Tower Icon will flash while searching, and be
solid on screen when the signal is received.
• For information about WWVB Atomic Time visit:
bit.ly/AtomicTime
TX141TH-Bv3
Outdoor Sensor
513-21867
(513-1429BL)
Atomic Clock
SETTINGS
TIME ZONES
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
1. Hold the button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the
button to confirm and move to next
item.
4. Press the button at any time to exit.
Settings order:
• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTOMATIC/ DST ALWAYS OFF / DST ALWAYS ON
(Change Spring/Fall) (No change in Spring) (No change in Fall)
• Time Zone
• 12/24 Time Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month
• Fahrenheit/Celsius
Language:
The language selected in this menu will adjust
the Weekday readout and menu items.
Atomic OFF:
If Atomic OFF is selected, menu will skip DST
and Time Zone settings and move straight to the 12/24
Hour Format setting.
Weekday:
The Weekday sets automatically when Year,
Month and Date are set.
ADJUSTABLE BACKLIGHT
When using the power cord, press the button to
adjust your backlight brightness. There are 4 levels
plus an off option.
BUTTON FUNCTIONS
Press to search for Atomic Time Signal.
Hold to enter Settings Menu.
+ (PLUS)
Settings:
Press to adjust settings. Hold to adjust quickly.
Hold to search for Add-on Sensor.
- (MINUS)
Settings:
Press to adjust settings. Hold to adjust quickly.
Press to switch between Desired Time or Local Time.
Hold to adjust your Desired Time hour.
Press to adjust the information displayed: Time, Desired Hour,
Temperature... etc. The Auto-Scroll Icon will show when active.
Press to select Calendar Display.
Press to Adjust Backlight.
Settings:
Press to exit Settings Menu.
DESIRED HOUR (TIME ADJUST)
Have your clock match other times around the
world by setting a Desired Hour, kept accurate by
the Atomic time signal.
Note:
only the hour can be
changed.
Set Desired Hour:
1. Hold the button until the Hour flashes, “ Desired
Hour” will show.
2. Press the + (PLUS) button to adjust the hour. Press
the - (MINUS) button to reset hour to “Local Time”.
3. Press the button to confirm and exit.
Switch between Desired Time and Local time:
• Press the button to switch between Desired
Time and Local Time.
• Desired Time is indicated with the icon.
Note:
In the event of battery change or reset, these
settings will need to be readjusted.
VIEW LOCAL TIME SET DESIRED HOUR VIEW DESIRED HOUR
CALENDAR DISPLAY OPTIONS
Press the button to change how the Calendar is
displayed. Full Weekday, Month/Date/Year, Weekday/
Month/Date.
CUSTOM TIME/TEMPERATURE DISPLAY
Press the button to adjust the data displayed on
screen. When the Auto-scroll Icon is showing, the
clock will switch between these options every 5
seconds.