background image

 

 

KISS Stor Slim 

 

KISS Stor Slim    Quick Installation Guide 

 

Package Contents 
 

z

 

KISS Stor Slim    RAID box. 

z

 

Two disk drive carriers. 

z

 

KISS Stor Slim    Quick Installation Guide. 

z

 

KISS Stor Slim user kit CD. (User’s Manual and GUI software) 

z

 

RS-232 cable with bracket and serial cable for COM port.   

z

 

Disk drive mounting screws. 

z

 

Two keys for drive carriers. (identical) 

 
 

 
 
 
 
 
 
 

Know your KISS Stor Slim   
 

z

 

KISS Stor Slim      Front view: 

 

Access LED indicator for indicating that hard disk is been accessing. 
Status LED indicator for indicating that disk current status. 

 

 

 

 

 

 

Summary of Contents for KISS Stor Slim

Page 1: ...z KISS Stor Slim user kit CD User s Manual and GUI software z RS 232 cable with bracket and serial cable for COM port z Disk drive mounting screws z Two keys for drive carriers identical Know your KISS Stor Slim z KISS Stor Slim Front view Access LED indicator for indicating that hard disk is been accessing Status LED indicator for indicating that disk current status ...

Page 2: ...ard AT ATX DC power input connector z Status of all LED indicators KISS Stor Slim The table lists all matches of 2 LED indicators for indicating status of RAID box Status indicator Red Green Access indicator Yellow RAID status Green Off Disk is installed no access Green On flash Disk is being accessing Red Off No disk installed or disk failure Flash Red Green On flash Disk is rebuilding ...

Page 3: ...e to RAID box from host computer 4 Connect the RS 232 cable to RAID box RS 232 port and COM port of the host Option for upgrading firmware or GUI remote monitor Caution Turn off and disconnect all electrical power from the system before beginning installation Note There is a triangular symbol on both PCB connector J10 and RS 232 cable connector please make sure that you connect in the right direct...

Page 4: ...disk with data at the top drive carrier and leave the new disks unlocked at the bottom drive carriers This identifies the disk with data as the source drive The host computer must in power off state 3 Power on the host computer 4 Lock the bottom drive 5 The RAID box will immediately begin mirroring the data from the source drive to the new disk drive in bottom drive carrier Any old data on the new...

Reviews: