In the photo at left, the spring-loaded doors are open for demonstration purposes only.
SECURE JOBSITE STORAGE
Incorrect use of this product can lead to serious injury or even death.
Read and follow all warnings and instructions
before operating or using this product.
• The power connection to
KNAACK PowerCrew
must be supplied by extension cord plugged into 120V GFCI (ground
fault circuit interrupter) protected outlet with proper ground.
• If a GFCI outlet is not available, use extension cord with GFCI protection built in.
• DO NOT allow jobsite storage box covers or doors to close on extension or power cord coming from the
KNAACK PowerCrew
.
• Protect the
KNAACK PowerCrew
from rain or liquid contact.
• Keep the
KNAACK PowerCrew
and other electrical equipment clean and free of moisture and dirt.
• DO NOT place electrical equipment in the bottom of the jobsite storage box.
• Your unit is equipped with a GFCI outlet. Conduct the simple test on page 4 to ensure proper function.
• Any modification or unintended use of this product shall immediately void all manufacturer’s warranties.
• Knaack LLC disclaims all liabilities for injuries to persons or property resulting from any modifications to, or
unintended use of this product.
READ THESE INSTRUCTIONS AND WARNINGS COMPLETELY.
KNAACK® PowerCrew™
is intended to provide 120V AC power to your
jobsite storage box allowing the recharging of battery-operated tools while
they are securely locked.
KNAACK PowerCrew
also allows you to work with
power tools right at the jobsite storage equipment location.
INSTALLATION INSTRUCTIONS
KNAACK
®
PowerCrew™
IN-BOX POWER SUPPLY
Model 500
WWW.KNAACK.COM
Approximate Installation Time: 10 min. per unit (0.15 hrs.) if 3” knock-out is present.
INSTALLATION TIME
WARNING
NOTICE
TOOLS REQUIRED
The following tools are required to install the
KNAACK PowerCrew
:
• Hammer (to remove knock-out)
• Contractor’s 3” die punch (for those models without knock-outs)
• #2 Phillips screwdriver
• Tape
• Center punch
• Drill with 7/32” drill bit
• 3/8” Nut Driver (or adjustable wrench)
PARTS LIST
Quantity
Description
Quantity
Description
1
Assembly Housing
1
Access Cover
1
Ground Bolt & Nut
3
Access Cover Mounting Screws (#8 x 5/8”)
1
Template
1
Warning Decal
1
Rev. A 10/08 Part No. 24-0276
PRODUCT REGISTRATION
Register Your
KNAACK PowerCrew
: Call 1-866-KNAACK1 or register online at www.knaack.com.
Model #
Serial #
Purchase Date:
Place of Purchase:
