KLIM HTD Gauntlet Glove Instruction Guide
This guide is distributed to client of KAIWERKS, LLC to satisfy regulatory requirement by stating
the required information in the product’s user manuals.
Subject: AHS (Active Heating System) module and variants
Alteration: This document has been modified for KLIM in their custom system in September
2019
How to use
1. Make sure your KLIM HTD Glove is fully charged. (24hrs is recommend for the 1
st
charge)
2. To turn on, press and hold the button for 3 seconds until the light indicator lights up Red
3. Short press to change between heating levels
a. HIGH Heat – indicated by the color RED
Please note that HIGH Heat is only available for 10 minutes at a time. After 10 minutes
your glove will automatically switch to MEDIUM Heat to preserve the temperature inside
the glove. HIGH Heat can be activated again by pressing the button until the indicator
light turns Red.
b. MEDIUM Heat – indicated by the color BLUE
c. LOW Heat – indicated by the color GREEN
4. To turn off, press and hold the button for 3 seconds until the light indicator disappears
Charging
· Only charge the batteries that had experienced similar usage in pairs. Otherwise
assume 12hrs of charge time to balance the paired batteries
· Remove the battery from the zipper pocket located on the inside of the glove
· Let batteries warm up to ambient temperature before charging
· Connect the charger to a wall socket and 2 green lights will come on. (Avoid using a
power strip with other appliances)
· Check that the battery is dry and free of any condensation
· Securely connect the charger terminals to the batteries
o Red light indicates the battery is charging
o Flashing green and red lights indicates 90% charge completed
o Green light indicates charging completed
**If the first red light change to green after connecting the second battery this
means the two pairs of batteries are out of balance and the charge will charge
the weaker battery first to ensure the pair is balanced
· Always charge the batteries after use to prolong battery life
· Always remove the batteries from the charger after charging is complete
· Never charge the batteries below 0
⁰
C (32ºF) or above 40
⁰
C (104ºF)
