Specifications
Part No.
KP45001
Drill:
12V, 14.4V, 18V (MAX 1,000RPM)
Nose Piece Sizes:
(1) 2.4mm (3/32”) (2) 3.2mm (1/8”)
(3) 4.0mm (5/32”) (4) 4.8mm (3/16”)
Suitable For:
Aluminium, Steel & Stainless Steel Rivets
2.4mm (3/32”) 3.2mm (1/8”)
4.0mm (5/32”) 4.8mm (3/16”)
Weight:
0.369kg
Min Torque Strength:
11Nm (8 ft/lbs)
Hex Shank:
1/4” (6.35mm)
Dimensions:
59mm x 158mm
General Safety Information
Save all warnings and instructions for future reference.
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in serious injury.
Work Area
1. Keep the work area clean and well lit. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons.
2. Keep bystanders, children, and visitors away while operating the tool. Distractions can result in the loss of control of the tool.
Personal Safety
1. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating the tool increases the risk of injury to persons.
2. Dress properly. Do not wear loose clothing or jewellery. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair increases the risk of
injury to persons as a result of being caught in moving parts.
3. Avoid unintentional starting. Be sure the switch of the tool is OFF before connecting the drill attachment. Do not carry the tool with your finger on the tool trigger or connect the tool to the drill
attachment with the trigger ON.
4. Remove adjusting keys and wrenches before turning the tool ON. A wrench or a key that is left attached to a rotating part of the tool increases the risk of personal injury.
5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.
6. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use.
7. Always wear eye protection. Wear approved safety eye protection.
8. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise can contribute to hearing loss.
9. Wear suitable gloves to reduce the vibration effects on the user.
Tool Use and Care
1. Use clamps or other practical ways to secure and support the work piece to a stable platform. Holding the work by hand or against the body is unstable and can lead to loss of control.
2. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed.
3. Do not use the tool if the trigger does not turn the tool ON or OFF. Any tool that cannot be controlled with the trigger is dangerous and must be repaired, by an authorised repair agent.
4. Disconnect the drill attachment from the drill before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool
unintentionally.
5. Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users.
6. Maintain the tool with care. A properly maintained tool is easier to control.
7. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool’s operation. If damaged, have the tool serviced before using, at an
authorised Kincrome repair agent. Many accidents are caused by poorly maintained tools.
8. Use only accessories that are for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons.
Additional Safety Warnings
1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors which cannot be built into this product, but must be supplied by the operator.
2. Only use with accessories rated to handle the forces exerted by this tool during operation. Other accessories not designed for the forces generated may break and forcefully launch pieces.
3. Attach all accessories properly to the tool. A loose accessory may detach or break during operation.
4. Do not force the tool. Use a larger one if needed.
5. Anyone using vibrating tools regularly, or for an extended period should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being
caused or worsened from use. Pregnant women or people who have impaired blood circulation to the hand, past hand injuries, nervous system disorders, diabetes, or Raynaud’s Disease
should not use this tool. If you feel any symptoms related to vibration (such as tingling, numbness, and white or blue fingers), immediately discontinue use and seek medical advice as soon as
possible.
6. Do not smoke during use. Nicotine reduces the blood supply to the hands and fingers, increasing the risk of vibration-related injury.
Unpacking
1. Unpack all the components from the blister packaging. When unpacking the KP45001 EZI-RIV Drill Attachment, carefully inspect for any damage that may have occurred during transit or
storage. Check for loose, missing or damaged parts.
2. Ensure all packaging materials are disposed of as per your local council guide lines.
WARNING! DO NOT use the EZI-RIV Drill Attachment on the following items:
• Impact Drivers (Pneumatic, Electric or Cordless)
• Impact/Rotary Hammer Drill (Pneumatic, Electric or Cordless)
• Impact Wrench (Pneumatic, Electric or Cordless)
Using the EZI-RIV Drill Attachment, on any of the above products will cause damage to the unit, and will NOT be covered by warranty!
Riveter Drill Attachment
2.4mm (3/32”) - 4.8mm (3/8”)
KP45001
Nose Piece (4)
Hex Shank (6)
6.35mm (1/4”)
Sight Window (8)
Body Housing (7)
Wrench (9)
Nose Housing (5)
(1) (2)
(3)
EZI-RIV
TM
Know Your Product
