![background image](http://html.mh-extra.com/html/kenwood/tt300-series/tt300-series_user-manual_193226001.webp)
before using for the first
time
●
Remove all packaging and any
labels.
●
Wrap excess cord around the cord
storage device on the underside of
the toaster
.
●
Operate the toaster once on
setting 3 without bread. (The lever
will not stay down unless the
toaster is plugged in).
●
As with all new heating elements,
your toaster may emit a slight
burning smell when it is first
switched on. This is normal and
not a cause for concern.
key
removable warming rack
lever (with 'Hi-Rise™' for extra lift)
browning control
‘cancel’ button with indicator
light
‘defrost’ button with indicator
light
‘reheat’ button with indicator
light
crumb tray
cord storage
to use your toaster
1 Set the browning control. (Use a
low setting for thin or dry bread.)
2 Insert the bread, muffins, bagels
etc.
3 Lower the lever
until it locks, the
light on the cancel button will glow.
(The lever will not stay down unless
the toaster is plugged in).
●
To toast frozen bread, once the
bread is lowered press the
‘defrost’ button, its light will come
on.
●
To warm toast that’s popped up
but gone cold, lower the toast then
press the 'reheat' button. Its light
will come on.
●
To stop toasting at any stage,
press the ‘cancel’ button.
4 Your toast will pop up
automatically. To raise it higher, lift
the lever.
hints on using your
toaster
●
Select a lower setting for light
browning, for toasting one slice
only or for dry bread.
●
Dry/stale bread toasts more
quickly than fresh bread and thinly
sliced bread toasts more quickly
than thickly sliced bread. Therefore
the browning control should be set
at a lower setting than usual.
●
For best results ensure that the
bread slices are of an even
thickness, freshness and size.
●
In order to achieve uniform
browning we recommend you wait
a minimum of 30 seconds
between each toasting so that the
control can automatically reset.
Alternatively select a lower setting
when additional toasting is carried
out.
to use the warming
rack
1 Place warming rack on top of
toaster
.
2 Put your food on the rack (slice
thick items in half to stop their
outsides burning). Watch to make
sure it doesn’t burn, and turn it
over half way through.
3 Set the browning control to 1, 2 or
-
but no higher than
.
4 Lower the lever.
5 The lever will automatically rise at
the end of the warming cycle.
safety
●
Burnt food can catch fire, so:
●
●
never leave your toaster on
unattended;
●
●
keep your toaster away from
anything (eg curtains) that could
catch fire;
●
●
set the browning control lower for
thin or dry bread;
●
●
set the browning control no higher
than
when using the warming
rack; and
●
●
never warm food with a topping or
filling (eg pizza): if it drips into the
toaster, it could catch fire.
●
To avoid electric shocks, never:
●
●
let the toaster, cord or plug get
wet; or
●
●
put
your hand or
anything metal,
eg a knife or foil, into the toaster.
●
Always unplug the toaster when
not in use, before cleaning or
attempting to clear jammed bread.
●
Never cover your toaster with a
plate or anything else - it could
overheat and catch fire. For the
same reason, never completely
cover the warming rack.
●
When using the warming rack,
never wrap the food up. Plastic
wrapping will melt and could catch
fire. Foil will reflect heat, damaging
the toaster.
●
Keep children away from the
appliance and never let the cord
hang down where a child could
grab it (clip excess cord into the
cord storage clips in the base).
●
Don’t let infirm people use the
machine without supervision.
●
Never touch hot surfaces
especially the metal top area and
the warming rack. If you're using
the toast slots, remove the
warming rack so it can't burn you.
●
Never use an unauthorised
attachment.
●
Never use a damaged toaster. Get
it checked or repaired: see 'Service'.
●
This toaster is for domestic use
only.
●
Young children should be
supervised to ensure that they do
not play with the appliance.
before plugging in
●
Make sure your electricity supply is
the same as the one shown on the
underside of your toaster.
Important – UK only
●
The wires in the cord are coloured
as follows:
Green and Yellow = Earth,
Blue = Neutral,
Brown = Live.
●
The appliance must be protected
by a 13A approved (BS1362) fuse.
●
WARNING: THIS APPLIANCE
MUST BE EARTHED.
Note:
●
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
●
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable pug is inadvertently
inserted into a 13A socket outlet.
●
This toaster complies with
European Economic Community
Directive 89/336/EEC.
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7
1
2
3
4
5
6
7