WARRANTY:
To activate the one year limited warranty on your new Vision Viewer simply complete the warranty card
enclosed and return to Ken-A-Vision. The warranty will not apply if your serial number has been removed
or if the product has been tampered with, disassembled or damaged by misuse, accident, modification or
unauthorized repair.
SYSTEM REQUIREMENTS TO OPERATE USB:
PC 64 MEG of RAM or higher
233 Mhz or higher processor with USB port
Microsoft Windows 98+
Microsoft Internet Explorer 4.0
(NT is not video compatible)
Mac OS 8.6 or 9
LIGHTING:
Never point your Vision Viewer at direct sunlight.
Subjecting the Camera “eye” to direct sunlight will
discolor the filter over the CMOS chip and create an adverse picture
.
INFORMATION TO THE USER:
Changes or modifications not expressly approved by the party responsible for compliance could void the
users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with instructions, may cause harmful interfer-
ence to radio communications. However, there is no guarantee that interference will not occur in a par-
ticular installation.
Product specifications are subject to change without notice.
5615 Raytown Road
Kansas City, MO 64133
Phone: (816) 353-4787 Fax: (816) 358-5072
Vision Viewer
Instruction Manual
kav.instrcman.visnvwr.pc.v2
