background image

2

1

4

3

XL-PR3B / LVT1181-001A / J,C,UJ

XL-PR3B / LVT1181-001A / J,C,UJ

XL-PR3B / LVT1181-001A / J,C,UJ

XL-PR3B / LVT1181-001A / J,C,UJ

Stereo headphones .......................................................................................................................... 1 pc.
Remote control ................................................................................................................................. 1 pc.

Supplied Accessories

Concerning Compact Discs

PORTABLE CD PLAYER

XL-PR3B

INSTRUCTIONS

Thank you for purchasing this JVC product. Please read these instructions carefully before starting
operation to be sure to obtain optimum performance and a longer service life from the unit.

Only compact discs bearing this mark can be used with this unit.

However, continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage
the unit.

If moisture has formed on a disc

When moisture has formed because the
disc was brought suddenly into a warm
room from a cold environment, wipe off
the moisture using a soft dry cloth.

When storing discs

Avoid locations which are
• Exposed to direct sunlight.
• Susceptible to high levels of humidity or

dust.

• Directly exposed to heat from a heating

appliance.

• On top of a car dashboard or near the

rear window.

Handling precautions

• On the label side (the side with writing)

Do not write anything using a pencil,
ball-point pen, etc. Do not use adhesive
paper or labels.

• On the disc (shiny) side

Handle this side carefully to keep it free
from fingerprints or scratches. Do not
use record cleaners, solvents, etc.

• Do not attach labels or stickers to CDs.

Do not use CDs with exposed adhesive
from tape or left over peeled off stickers.

• Do not use scratch-proof protectors or

covers other than those specified for use
with this unit.

If the disk surface is dirty

Wipe it with a damp cloth and then wipe dry.
Wipe from the center toward the outer edge.

How to hold a disc

How to store the disc in
its case

How to remove a disc from its case

Label side up

LVT1181-001A [J,C,UJ]

CD-R and CD-RW discs recorded with the audio
CD format can be played back, though some may
not be played back because of the disc character-
istics or recording condition.

Play surface (shiny surface)

For Customer Use:

Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the player. Retain this
information for future reference.

Model No.

Serial No.

EN

0604SKMCREORI
©2004 VICTOR COMPANY OF JAPAN, LIMITED

Power Supply Preparations

The illustration of the grip band is omitted.

Using dry-cell batteries
(not supplied)

Caution:

Do not forcibly open the battery lid too wide.

Battery indicator

10 

44:48

This indicator appears when the batteries are almost out of power.
Power will be cut off a short while later.

Note:

Turning off the Anti-Shock Protection EX will save the battery power
more or less. For details, see “Anti-shock Protection EX” on page 7.
(Available for an Audio CD only)

Battery indicator

Using the AC adaptor (not supplied)

DC IN 4.5V

Notes:

• Even if the unit is turned off, small power is consumed as long

as the AC adaptor is connected to the AC power outlet.

• When you want to purchase the AC adaptor, see page 4.

AC power outlet

Two “AA” (LR6) alkaline batteries.

AC adaptor

AC adaptor (for multi voltage area only)
(not supplied)

Before use

Make sure the present voltage of your AC adaptor fits to your lo-
cal voltage before plugging it into the AC power outlet. If it
doesn’t, shift the AC line-voltage selector with a screwdriver so
that it corresponds to your local voltage.

VOLTAGE

ADJUSTOR

AC 110V
~127V

AC 220V
~240V

If the power plug will not fit your socket, use the AC plug adaptor.

How to use the AC plug adaptor (not
supplied)

Note:

When you want to purchase the AC adaptor and the AC plug
adaptor, see page 4.

Precautions

Safety

1. Care of AC adaptor

 - The cord of the AC adaptor should be

routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Never take hold of the
AC adaptor if your hand is wet, and always grasp the plug
when connecting or disconnecting it.

2. Disconnect when not in use

 - When not in use, be sure to

disconnect the AC adaptor from the AC power outlet.

3. Batteries

 - If the unit is not used for a long period of time or is

used only from an AC power source, remove all the batteries
to prevent potential damage due to battery leakage. Do not
mix (old and new ) batteries or different types of batteries.

Installation

■ 

Environment

1. Condensation

 - Moisture may form on the lens in the follow-

ing conditions…

• immediately after a heater has been turned on.
• in a steamy or very humid room.
• when the unit is suddenly moved from a cold environment

to a warm one. If moisture forms inside this unit, it may not
operate properly. To correct this problem wait about one
hour for the moisture to evaporate.

■ 

Placement

1. Foreign Material

 - Care should be taken so that objects do not

fall into and liquids are not spilled into the unit. Do not subject
this unit to excessive smoke, dust, mechanical vibration, or
shock.

2. Magnetism

 - The unit should be situated away from equipment

or devices that generate strong magnetic fields.

3. Stacking

 - Do not place any objects on top of the unit.

Maintenance

(See page 2 for details.)
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.

Service

1. Damage Requiring Service

 - The unit should be serviced by

qualified service personnel when:
(a) The AC adaptor is damaged; or
(b) Objects have fallen or liquid has been spilled into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits a

marked change in performance; or

(e) The unit has been dropped, or the enclosure damaged.

CAUTION!

THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE
OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION!

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this
equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-

ceiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Any unauthorized changes or modifications to this equip-
ment would void the user’s authority to operate this device.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

VARNING

: Synlig Och 

osynlig laserstrålning när 

den öppnas och spärren är 

urkopplad. Betrakta ej 

strålen.

(s)

CAUTION

: Visible and invisible 

laser radiation when open and 

interlock failed or defeated.

AVOID DIRECT EXPOSURE TO 

BEAM.

(e)

ADVARSEL

: Synlig og usynlig 

laserstråling når maskinen er 

åben eller interlocken fejle.

Undgå direkte eksponering 

til stråling.

(d)

VARO

: Avattaessa ja 

Suojalukitus ohitettunatai 

viallisena olet alttiina näkyvälle 

ja näkymättömälle lasersäteilylle.

Vältä säteen kohdistumista 

suoraan itseesi.          (f)

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT
2.

CAUTION:

 Do not open the top cover. There are

no user serviceable parts inside the unit; leave all
servicing to qualified service personnel.

3.

CAUTION:

 Visible and invisible laser radiation

when open and interlock failed or defeated. Avoid
direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL,

PLACED OUTSIDE THE UNIT.

CAUTION:

• Do not block the ventilation opening or holes. (If the venti-

lation openings of holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)

• Do not place any naked flame sources, such as lighted

candles, on the apparatus.

• When discarding batteries, environmental problems must

be considered and local rules or laws governing the dis-
posal of these batteries must be followed strictly.

• Do not expose this apparatus to rain, moisture, dripping or

splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.

This Class B digital apparatus complies with Canadian
ICES-003.

Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

INFORMATION (For Canada)

This digital apparatus does not exceed the Class B limits for radio
noise emissions from digital apparatus as set out in the
interference-causing equipment standard entitled “Digital
Apparatus”, ICES-003 of the Department of Communications.

THE FOLLOWING NOTICES ARE APPLIED ONLY FOR THE U.S.A.:

Cautions

Listening precautions

Do not play your headphones or earphones at a high volume.
Hearing experts advise against continuous extended play.

If you experience a ringing in your ears, reduce volume or discon-
tinue use.

Do not use while operating a motorized vehicle. It may create a
traffic hazard and is illegal in many areas.

You should use extreme caution or temporarily discontinue use
in potentially hazardous situations.

Even if your headphones or earphones are an open-air type de-
signed to let you hear outside sounds, don’t turn up the volume
so high that you can’t hear what’s around you.

Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BE-
FORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and

clearly, and without distortion.

Once you have established a comfortable sound level:
• Set the dial and leave it there.

Rechargeable batteries

• Rechargeable batteries (not supplied) can be used.
• To use the rechargeable batteries, follow the instruction manual

attached to the rechargeable batteries and charger (not sup-
plied).

Dry cell batteries

To prevent damage to the batteries and electrolyte leakage, heed
the following points.
• Align the 

,

 and 

.

 polarities properly when inserting the bat-

teries.

• Do not mix different types or makers of batteries or old and

new batteries.

• Remove the batteries if you do not plan to use the unit for a

long period of time.

• Do not throw batteries into a fire, and do not short-circuit, dis-

assemble or subject them to excessive heat.

• Do not attempt to recharge dry cell batteries.

Carrying dry cell batteries around

When putting dry cell batteries in a pocket or bag, ensure that no
other metal objects such as a necklace are placed together with
them. Contact with metal may cause short-circuiting which, in
turn, may cause a fire.

AC adaptor

• Handle the AC adaptor carefully. Improper handling is dan-

gerous.

• Do not touch it with wet hands.
• Do not place heavy objects on top of it.
• Do not forcibly bend it.

• Be sure to connect only the specified AC adaptor with the unit.
• Disconnect the AC adaptor from the power outlet if the unit is

not going to be used for a long time.

Unit

No altering or remodeling

This can cause malfunctioning.

No dropping or strong impacts

This may damage the unit.

Locations to be avoided

Avoid using the unit in the following locations since they can
cause malfunctioning.
1.  Bathrooms and other moisture-prone places.
2. Warehouses and other dusty places
3.  Very hot places near heating appliances, etc.

Do not leave the unit exposed to direct sunlight for
long periods of time

This may deform or discolor the cabinet and may also cause
malfunctioning.

When purchasing AC adaptor /
AC plug adaptor

Be absolutely sure to purchase the AC adaptor designed  espe-
cially for this unit.

AC adaptor: AA-R4513 (for the U.S.A. and Canada)

AA-R4516 (for multi voltage area)

AC plug adaptor: QAM0060-001 (for multi voltage area)

For details, check with your dealer.

E

L

E

C

T

R

O

N I

C

I N D

U

S

T

R

IE

S

A

S

S O

C I A T

I O

N

EST. 1924

Put the grip band on your hand

Adjust the grip band to your hand size.

Portable CD player

Type

: Compact disc player

Signal detection system : Non-contact optical pickup (semiconductor laser)
Pickup system

: 3 beam laser

Number of channels:

: 2 channels (stereo)

Frequency response

: 20 Hz to 20 kHz

Wow & flutter

: Unmeasurable

Output

: Headphones (3.5 mm dia. stereo 

× 

1)

9 mW/ch at 10 % THD/16 

 matching impedance (16 

 to 1 k

)

FM tuning range

: 87.5 MHz - 108.0 MHz

Duration of battery

: Approx. 20 hours when using two alkaline batteries (LR6)

(with Anti-Shock
Protection EX OFF)
Power requirements

: DC 3 V (“AA” or “LR6” size battery 

× 

2)

DC 2.4V (rechargeable battery 

× 

2)

DC IN 4.5 V

Dimensions (W

×

H

×

D) : 145.5 mm 

×

32.1 mm 

×

145.5 mm (5-

 3

/

4

” 

× 

1-

 5

/

16

” 

×

 5-

 3

/

4

”)

(Excluding buttons and controls)

Mass

: 300 g (0.67 lbs)

(with grip band, without batteries)

AC adaptor (not supplied)

Input power source

: AC 120 V, 60 Hz (for the U.S.A. and Canada)

AC 110V - 127V/220 V - 240V, 50/60 Hz (for multi voltage area)

Output voltage

: DC 4.5 V, 600 mA

*

 Design and specifications are subject to change without notice.

Specifications

Unit

Wipe the unit with a soft cloth. Remove stubborn dirt using a cloth which has been dipped in water
or soapy water and wrung out, and then wipe dry.
• If you intend to use a chemically treated cleaning cloth, read its directions first.
• Do not use alcohol or paint thinners.

Lens

Maintenance

Air blower for
camera lens

Lens

Troubleshooting

If the remedies indicated in the chart do not solve the problem, refer to the directory of Autho-
rized Service Centers (enclosed with this unit) to locate a convenient service center, or consult
your dealer for instructions.

Problem

Poor tuner reception

Does not turn on.

Cannot close the lid.

Cannot play discs.

Cannot hear music—too
noisy.

TV picture is distorted.
Other radio reception is
noisy.

“dISC” or “Er” is displayed
when a disc is in the
player.

Check this

• Extend the headphone cord (antenna) to improve reception.

• Is the AC adaptor securely connected?
• Is the HOLD switch set to OFF position?

Is the disc properly secured in place?

• Is the disc properly secured in place?
• Is there moisture condensation on the lens?

(Wait for about an hour and then try again.)

• Are MP3 files recorded on the disc?
• Do MP3 files have the extension code—.mp3?
• Are MP3 files recorded in the format compliant with ISO

9660?

• Is the headphone plug inserted all the way?
• Is the plug dirty? (Wipe away dirt on the plug.)
• Are you playing a compatible disc? While playing a non-

MP3 file, you will hear a noise. (Note it may not be an MP3
file although it has the extension code—.mp3.)

Are you using the unit too near a TV or tuner? (If the TV or
tuner is connected to a simple indoor antenna, connect it to
an outdoor antenna.)

• Is the disc damaged?
• Is the disc playable on this player?
• Has the disc been inserted upside down?

Reviews: