LYT1468-004A
0605HOH-AL-VP
(M5E3)
© 2005 Victor Company of Japan, Limited
Read this first!
– How to handle the Hard Disk Camcorder –
Please read this together with the instruction manual
before using the camera.
8
Make a backup of important recorded data
Protect your important recorded data by copying the files
to PC. It is recommended to copy it from your PC to a DVD
or other recording media for storage. Refer to the software
installation and USB connection guide.
8
Make a trial run before recording important
data
Play back the recorded data to check that the video and
sound have been recorded correctly.
8
Check the compatible recording media
The following SD cards have been guaranteed to work
with this camera. Others are not guaranteed to work, so
buy such products with caution.
SD memory cards
: By Panasonic, TOSHIBA, pqi (still
image only) and SanDisk
●
If other media are used, they may fail to record data
correctly, or they may lose data that has already been
recorded.
●
MultiMediaCards are not supported.
●
For video recording, use a high-speed SD memory card
(at least 10 MB/s).
8
Format recording medium before using
Before using this camera, use the Format function
[FORMAT] in the menu to format the built-in hard disk or
SD cards. Also, be sure to format the newly-purchased SD
cards with this camera before using them. This enables
stable speeds and operation when accessing the
recording medium.
8
Take care to hold the camera correctly
during recording
Do not cover the area near the lens, stereo microphone
and camera sensor with your finger or any object while
recording. Refer to “Index” of the instruction manual.
8
When a certain length of time passes
without operation
●
When using the battery, the power is turned off
automatically to conserve power. Use the power switch
to turn on the power again.
●
When using the AC adapter, the access lamp lights up,
and the LCD turns off (the camera enters the sleep
mode). Operation is restored once any operation is
made.
8
Reset the camera if it does not operate
correctly
This camera uses a microcomputer. Factors such as
background noise and interference can prevent it from
operating correctly. If the camera does not operate
correctly, reset the camera. Refer to “Troubleshooting” of
the instruction manual.
8
If a problem occurs with the SD Memory
Card, bring the card together with the
camera.
When requesting repairs for breakdowns by your dealer or
JVC service center, be sure to bring your camera together
with the SD Memory Card. If one of them is not included,
the cause cannot be diagnosed, and the repair cannot be
made properly.
After reading this sheet, store it together with the
instruction manual, and refer to it when necessary.
ENGLISH
LYT1468-004A_EN_US_B5_0607.fm Page 1 Thursday, June 23, 2005 9:28 AM
