JVC DLA-RS55 Firmware Update Manual Download

Page: 1 / 5

for DLA-

RS55

This manual describes how to update the firmware for the DLA-

RS55 model.

**CAUTION** Do not unplug unit while firmware is being updated.

Please carry out the update in the order shown below:

１

. Install Software

２

. Projector LAN Settings

３

. Projector Software Update

１

. Install Software

First download the projector update software from the JVC website to your desktop on your computer.
This example uses the DLA-X70R

(1) Double-click the downloaded file on the desktop. This will start the installer.

(2) The dialog box shown on the right will appear.
Click the [Next] button.

(3) The dialog box shown on the right will appear.
Click the [Next] button.

Firmware Update Manual

(Ver.1.1)

Summary of Contents for DLA-RS55

Page 2: ...e dialog box shown on the right will appear Click the Next button 6 The dialog box shown on the right will appear Click the Install button Please wait until the installations is complete 7 The dialog box shown on the right will appear After installation is complete click the Finish button to exit the wizard ...

Page 5: ...ff 3 The update has been completed Close the update program 4 After updating remove the power cable from the projector wait until all lights go out then reconnect power Please check that the software version 28 056 has been updated after finishing the update The version number is available in the Information tab of the projector menu Close Up LEDs Close Up LEDs ...