background image

EN 12941:1998 

RESPIRATORY PROTECTION DEVICE - 

POWERED FILTERING DEVICE INCORPORATING 

A HELMET OR A HOOD. CLASS TH1 DEVICE

IMPORTANT - This manual must be read 

and fully understood before any product 

from the PowerCap

®

 Range is used. 

This manual must be retained for future reference.

POWERCAP

®

 ACTIVE

POWERED RESPIRATOR UNIT

USeR INStRUCtION MANUAl

 

GB

Summary of Contents for POWERCAP ACTIVE

Page 1: ...G DEVICE INCORPORATING A HELMET OR A HOOD CLASS TH1 DEVICE IMPORTANT This manual must be read and fully understood before any product from the PowerCap Range is used This manual must be retained for future reference POWERCAP ACTIVE POWERED RESPIRATOR UNIT ung GB ...

Page 2: ...image Charging the batteries On receipt of the unit run the battery flat and charge for 16 hours to reach maximum capacity Follow on charging cycles should then take 8 hours If the unit is run completely flat or the unit has not been used for a long period it would be advisable to repeat the 8 16hr charge cycle A reduced charging time will reduce the time that PowerCap will operate at its intended...

Page 3: ...ING AND DAILY USE Under normal conditions and assuming regular maintenance the PowerCap motor unit should last for 2 3 years other parts will need replacing as detailed below Prior to use of the PowerCap Active the user must check all components and satisfy themselves that it is suitable for use if any parts need replacing follow instructions below Spare parts are available from the original retai...

Page 4: ...ectacles must also be worn in the normal way within PowerCap Active i e Behind the visor The PowerCap Active airflow will help to prevent fogging of both the Spectacles and the Visor PowerCap Active IP The visor is manufactured of Polycarbonate and has been tested according to EN166 1995 the standard for Personal eye protection As required by European Health and Safety requirements the user is adv...

Reviews: