INSTRUCTION MANUAL
EYELET CURTAIN POLE KIT
It is recommended that this curtain pole should only be installed by persons competent in DIY. At John Lewis, we are committed
to making great products. From our in-house Design Team, to our Buyers, we work together to bring great design to life.
Our Product Technologists work collaboratively with our Buyers and suppliers to ensure the legality, safety and quality of the
product we sell. We are all committed to designing and developing products to the highest industry standards.
We hope you are happy with your product and welcome any feedback or comments you may have.
Please retain these instructions for future reference.
Thank you for purchasing this Curtain pole. Please read the instructions carefully
before use to ensure safe and satisfactory operation of this product.
INTRODUCTION
TOOLS REQUIRED
GUIDE TO WALL MOUNTING & FIXINGS
Warning:
Although we have provided
fi
xings, different wall materials require different types of screws /
fi
xings. Please ensure you
use the correct screws /
fi
xings for your type of walls and seek professional advice if you are not sure. Failure of the product due
to incorrect
fi
xings is the responsibility of the installer.
Important
- When drilling into the walls always check that there are no hidden wires or pipes etc.
Take care when drilling on glazed tile surfaces in case the drill slips.
KEY INFORMATION
FIXINGS
General Purpose wall plug
Generally aerated blocks should not be used to support
heavy loads, use a specialist
fi
tting in this case. For light
loads, general – purpose wall plugs can be used.
PRODUCT INFORMATION
This curtain pole can be cleaned using a soft damp cloth.
Warning:
Please do not use any solvent or chlorine based cleaners as this will damage the
fi
nish.
C ARING FOR YOUR
PRODUCT
John Lewis Partnership 171 Victoria Street London SW1E 5NN
johnlewis.com
You will require the following tools:
Pencil, electric drill, scew driver, hack saw,
fi
le, allen key, tape meaure, spirit level, ladder
Plasterboard wall plug
For use when attaching light loads on to plasterboard
partitions.
Cavity Fixing wall plug
For use with plasterboard partitions or hollow wooden
doors.
Hammer Fixing wall plug
For use with walls stuck with plasterboard. The
hammer
fi
xing allows it to be
fi
xed to the wall rather
than the plasterboard. Always check the
fi
xing is secure
to the retaining wall.
180cm - 360cm. Maximum curtain weight 6.5kg (14.3lb) per 150cm length
MAX CURTAIN
WEIGHT
PARTS LIST
120cm
2x Finials
1x 120cm Pole
2x Brackets
1x Allen key
Screws & wall plugs
180cm
2x Finials
1x 180cm Pole
2x Brackets
1x Allen key
Screws & wall plugs
240cm
2x Finials
2x 120cm Pole
1x Connector
3x Brackets
1x Allen key
Screws & wall plugs
300cm
2x Finials
2x 150cm Pole
1x Connector
3x Brackets
1x Allen key
Screws & wall plugs
360cm
2x Finials
2x 180cm Pole
1x Connector
3x Brackets
1x Allen key
Screws & wall plugs
