background image

Operation Manual

Thanks for choosing JETBeam 
Flashlight. Please read the operation 
manual carefully before using your light.

Features:

· Specially designed for Military, Law  

Enforcement, Self-defense, Hunting, 
Search& Rescue and Outdoor activities

· CREE XM-L T6 LED 
· Max output reaches 550 lumens with an 

effective range of 150 meters

· The Rapid Response Control Ring allows 

the user to easily select different 
brightness level

· Infinite brightness accessible
· Stainless steel rapid response control 

ring for durability and reliability

· Stainless steel bezel protects the head 

and tailcap from drops and impacts

· Newly designed high efficiency broad 

voltage drive circuit

· Tailstand as a candle
· Impact-resistant accords with US 

MIL-STD-810F

· IPX-8 standard waterproof (2 meters)

Specifications:

Model: RRT0 XML
LED: CREE XM-L T6
Maximum output: 550 lumens
Reflector: Custom-designed aluminum       
 reflector
Lens: Toughened ultra-clear mineral glass      
          with anti-reflective coating
Material: Aero grade aluminum alloy
Finish: HA III military grade   

   

            hard-anodized
Battery: RCR123*1 / CR123A*1 / AA*1
Switch: Forward clicky
Dimensions: Head diameter 25.4mm
 

Tube diameter 20.5mm

 

Total length 100mm (without  

 

extension tube) 

 

Total length 116mm (with  

 

extension tube)   

Operation Instructions:

Battery Installation

1.Screw the tailcap off the flashlight in 

counter-clockwise direction.

2.Insert one battery, with the positive pole 

of the battery pointing to the head.

3.Screw the tailcap back on the flashlight  

tightly.

Tactical lighting

Half press the button at the tailcap, the 
flashlight is turned on;
Release the button at  the tailcap, the 
flashlight is turned off.

Permanent lighting

ON/OFF Switching

Switch ON:  Press the button at the  
tailcap until a “click” is heard and 
illumination starts;
Switch OFF: Press the button at the 
tailcap until a “click” is heard and 
illumination ends.
Brightness selection: With the light turned 
on (either momentary or constant), slowly 
rotate the Rapid Response Control Ring in 
a counter-clockwise direction to 
incrementally increase brightness to a 
desired level.
Alternatively, rotate the Rapid Response 
Control Ring in a clockwise direction and 
the output will incrementally decrease. 
With one CR123 battery, RRT0 has a 
maximum runtime of up to 100 hours on 
its lowest output and 1 hour 15 minutes on 
maximum output.

Strobe Selection: Rotate the Rapid 
Response Control Ring in a clockwise 
direction until the light is turned off. 
Continue to rotate the ring and the light 
will enter into strobe mode.

Using AA extension tube

This light can utilize one AA extension 
tube. Please follow the diagram to 
assemble the body, and you can use one 
AA battery to power the light.

Rapid Response Tactical Flashlight

Weight

72g (without extension tube)  

 

(without battery)

 

83g (with extension tube)   

    

(without battery)

NOTICE

1.Stated data has been measured 

according to the international flashlight 
testing standards ANSI/NEMA FL1 by 
using one RCR123 battery (3.7V, 
700mAH), one SYSMAX CR123 
battery(3V, 1550mAH) and one AA 
battery (1.2V, 2500mAH) in the 
laboratory. The data may vary due to 
different battery usage and 
environment conditions.

2.This product has infinitely brightness 

selection, thus, we only provide the 
data of highest and lowest output.

Warranty Service

All JETBeam products are warranted for 
quality. Any malfunctioning products can 
be exchanged for replacements from local 
distributor/dealer within the first 14 days 
after receipt of the light. This product can 
enjoy free warranty service within 18 
months from the date of purchase. After 
18 months, the warranty covers labor 
cost and maintenance, with the exclusion 
on the cost of accessories or repair parts. 
The warranty is nullified in any of the 
following situations:
1. The product(s) is/are broken down, 

reconstructed and/or modified under 
unauthorized conditions.

2. The product(s) is/are damaged through 

improper use.

3. The product(s) is/are damaged by 

leakage of batteries.

Details of warranty service, please contact 
regional distributor/dealer or send an 
email to [email protected]

RRT0

 

XML

LUMENS

1

h

15

min

20

min

260

5600cd 

(Peak Beam Intensity in RCR123 Battery)

150m 

(Beam Distance in RCR123 Battery)

 IPX-8, 2m 

(Waterproof AND Submersible)

1.5m 

(Impact Resistant)

LUMENS

550

LUMENS

3

h

45

min

110

LUMENS

100

h

0.005

RCR123 Battery

Max Output

CR123 Battery

Max Output

AA Battery

Max Output

CR123 Battery

Min Output

Maintenance

Every 6 months , the threads should be 
wiped with a clean cloth followed by a thin 
coating of silicon-based lubricant.

NOTE

: DO NOT use petroleum-based 

lubricants as they may damage the 
O-rings and void the product warranty

Reviews: