![background image](http://html1.mh-extra.com/html/jason-hydrotherapy/integrity-3260-sr/integrity-3260-sr_owners-manual_634940001.webp)
Jason International, Inc. •
501.771.4477
Page 1 of 9
Customer Service : 800.255.5766
INSPECTION
Inspect the unit prior to installation. In the event of a
problem, DO NOT install the unit.
All components are
factory assembled to the bath and the unit is water tested
and inspected prior to leaving Jason International, Inc.
If the carton shows sign of damage, inspect the product before
accepting and describe the problem on the Bill of Lading.
Note:
Transportation and insurance from Jason’s factory are
the buyer’s responsibility.
Damage sustained in transit is the responsibility of
the carrier.
If damage is discovered, the carrier must
be immediately notified in writing with a request for a
representative to inspect the unit. Failure of the carrier to
respond should be reported to the seller and carrier. Always
file a freight claim promptly.
The installer is responsible for insuring that the unit is free
from defects or shipping damage. In the event of a problem,
DO NOT install the unit. Jason International is not responsible
for damage that might have been avoided by inspection or
testing prior to installation.
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer.
ALL WARRANTY CLAIMS ON ACRYLIC SURFACE
DAMAGE MUST BE MADE PRIOR TO INSTALLATION.
Inspect plumbing and bath surface for missing or damaged
components. Alert your dealer of any discrepancies.
To protect the unit from damage keep the bath in the carton
until ready for installation.
EQUIPMENT ACCESS
In accordance with Building Codes, service access to all
therapy bath equipment, controls and electrical connections
must be provided during installation (see
Table 1 –
Specifications
for minimum access size). Insufficient access
will hinder repair and maintenance. Warranty service will not
cover costs of providing equipment access.
Jason offers an optional removable lateral skirt for all
rectangular baths. The skirts are available in matching acrylic
colors and provide convenient access to bath equipment as
well as an excellent finished appearance.
Owner’s Manual
Integrity
®
whirlpool Baths
InsTallaTIOn, OPeraTIOn, anD MaInTenanCe
“TO BE REMOVED FOR USE BY THE OCCUPANT.”
49-1013-100
Date 02/11
Jason International, Inc.
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
Owner’s reCOrD
Dealer:
Date Purchased:
Date Installed:
Installer:
PlaCe serIal nuMBer CarD wITh
PrODuCT COnfIguraTIOn In ThIs BOx
CauTIOn: DO nOT lIfT Or hanDle The BaTh BY ITs PluMBIng.
If the carton shows sign of damage, inspect
the product before accepting and describe the
problem on the Bill of lading.