User manual
JABLOTRON 100
DESCRIPTION OF KEYPAD (
Access module with segments
)
For the most convenient control and status indication the JABLOTRON 100 system offers various types
of access modules. Controlling (setting, unsetting and other available functions) can be done just by pressing
one button on the two-button segments. Moreover, the buttons are backlit in order to clearly indicate the
segment status at fi rst sight. The segments can also be used to control various devices – heating, window
shutters, gates, etc. An arbitrary number of segments can be used as needed.
Continuous yellow
PARTIALLY SET
Flashes red
ALARM
Continuous green
EVERYTHING OK
Flashes green
CONTROL
Continuous yellow
FAULT
When controlling the system using buttons on segments the command must be confi rmed with
authorization. This can be done by applying an RFID card or by entering a code on a keypad. Authorisation
can be done by RFID cards / tags of the OASiS system, Azor system or any other one working with EM
125kHz. If a high security level is required, it can be set so that the card authorization must be confi rmed
by entering an access code on a keypad. On the other hand mainly for home automation usage the control
via segments can be simplifi ed by setting that for setting or controlling devices no authorization is required.
This feature can be used e.g. to control window shutters on the house using a keypad.
Another advantage of controlling the system using segments is the possibility to carry out multiple
commands at the same time – it is therefore possible to set the house section with one segment, set
the garden section alarm with the second one and unset the garage section with the third one. Only one
authorization is required after selecting all options via segment buttons.
The authorization code entered on a keypad can consist of up to seven characters. It includes a prefi x
(one to three digits) a separating star and a four-digit code. It can thus be for example 123*1234 or 1*1234.
This code can be simplifi ed for buildings with only a few users by omitting the prefi x. Only a four digit code
is then used.
Card reader
Keypad with a reader
Keypad with a LCD display
and a reader
Access module
CARD READER / KEYPAD
Continuous red
SET / ON
Flashes red
ALARM / ALARM MEMORY
Continuous green
UNSET / OFF
Flashes green
ENTRY DELAY
