Page 1
SuperBus 8Z LED Touchpad
Status
Features
press both
Lights
System
Away
Pager
Off
No Delay
press both
press both
Test System Weekly
Silent
Stay
D
*
7
0
#
8
B
A
4
1
5
6
2
3
Bypass
Menu
C
9
5
1
6
2
7
8
3
4
NO DELAY
Enter Code
Power
Check
Status
Trouble
Bypass
Both Flashing
ALARM -
AWAY
STAY
SuperBus
™
8Z LED
Touchpad
Document Number: 466-1519 Rev. D
July 1998
INSTALLATION
INSTRUCTIONS
Product Summary
The SuperBus 8Z LED (light-emitting diode)
Touchpad lets you control most system operations of
a compatible security system (see the section
“Specifications”). The LEDs provide a visual display
of the systems’ current status.
Additional features include the following:
O
Built-in speaker for alarm and status sounds and
button-press beeps
O
Panic buttons for police, fire, and auxiliary
emergencies
Installation Guidelines
O
Mount the touchpad in an environmentally
controlled area (40°F to 100°F).
O
When mounting the touchpad’s back plate, allow
at least 4¼ inches on the left side for the Quick
Guide slide-out card.
O
For Concord
™
systems, up to 16 SuperBus
devices can be connected to the panel including
SuperBus 2x16 LCD Alphanumeric Touchpads,
SuperBus RF Receivers, HIM, HOM, ESM, etc.
O
Up to 4 SuperBus 8Z LED Touchpads can be
connected to Concord panels.
O
Each SuperBus device must have a different
device address to operate correctly. The touchpad
uses DIP switches for setting the device address
(factory set to 3).
O
Maximum current draw of the touchpad is 65
mA.
O
Do not exceed the panel’s maximum available
power when using panel power for bus devices
and hardwire detectors (see the specific panel’s
installation instructions for maximum available
power.)
O
Tables 1 and 2 describe the wiring limits for
Concord security systems that include an LED
touchpad.
Tools and Equipment Needed
O
Screwdriver
O
#6 screws and anchors (included)
O
Panhead screws for a gang box installation
O
Saw or utility knife for cutting wallboard
O
SuperBus 2x16 LCD Alphanumeric Touchpad
(for entering program mode)
Table 1. Maximum Touchpad Wire Lengths
Wire Gauge
(Unshielded
or Shielded)
Max. Touchpad Wire Length
Between LED Touchpad and
Concord Panel
18
700 feet
22
300 feet
Table 2. Combined Total of all Bus Device
Wire Lengths
Wire Gauge
Combined Total of all Bus
Device Wire Lengths for
Concord Systems with LED
Touchpad
18—unshielded
18—shielded
1,600 feet
900 feet
22—unshielded
22—shielded
2,000 feet
1,300 feet
60-728
