KB1 User Manual V1.0
1.Keyboard Appearance
2.Power/Connectivity
If the keyboard is switched to Bluetooth mode,only the Bluetooth function will be available.
There is only charging function when the USB cable is plugged in computer on Bluetooth
mode.
If the keyboard is switched to wired mode, only the wired mode function will be available,
other Bluetooth related functions such as pairing,multi-device switching function would not
be available.
3.Function Description
3.1 Wired mode
Users can use a Type-C cable to connect the keyboard to the computer and backlights often
on in wired mode.
3.2 Bluetooth Mode
Pairing:Long press Fn+
for 3 second to enter the pairing mode,
blinking blue means the
keyboard is in pairing mode.The Bluetooth name of the keyboard is KB1,the blue light will stay
on 1 second and goes out when the keyboard have been paired.The keyboard will enter sleep
mode if no Bluetooth device is found in 3 minutes.
Multi-device switching: The default device of the keyboard is
, press Fn +
to switch to
the second device, then long press Fn + for 3 second to enter the pairing mode. After the
pairing have been completed,the blue light is on for 1 second and then goes out. By using
the same method, you can switch between 3 devices by pressing Fn+
/
/
, “caps
lock” key blinking 3 times indicates successful switching.If you need to connect the fourth
device,press FN+
to open main Bluetooth and press FN+
for 3 second to enter
the pairing mode again.
When the keyboard has been idled for 3 minutes in Bluetooth mode, the keyboard backlight
will turn off. If it stays inactive for 10 minutes,the Bluetooth will be disconnected from the
host and enter the sleep mode. Press any button to wake up the keyboard and automatically
reconnect.
3.3 Keyboard Backlight Adjustment
Press
to change backlight effect (there’re 20 backlit effects, including ‘backlight off’).
Press Fn +
to change backlight color. The default backlight is multi-color effects. There
are 7 single-color plus the multi-color effects, a total of 8 color effects(some keys may not
have multi-color backlight effect).
Fn + F5: Minimize the brightness level of the keyboard (5 levels)
Fn + F6: Maximize the brightness level of the keyboard ( 5 levels)
Fn + + : Maximize the backlight flashing speed ( 5 levels)
Fn + - : Minimize the backlight flashing speed ( 5 levels)
3.4 Charging Instruction
Connect the computer or 5V charger to the keyboard by Type-C to charge the keyboard.If you
toggle the mode switch ‘Bluetooth’or ’cable’,
is often red.After it is fully charged,will be
often green.If you toggle the mode switch ‘Off’,
is off but it is still charging.
3.5 Battery Indicator
In Bluetooth mode,the Indicator flashes red if the voltage is lower than 3.2V. It indicates that
the keyboard is in low battery mode. Please connect USB-A to USB-C cable for charging.
3.6 Reset to Factory Setting
Long press Fn+ESC Key for 3 seconds,the backlight effect will return to the factory setting.
4.Compose key
