www.ismacontrolli.com
The performances stated in this sheet can be modifi ed without any prior notice.
pag. 1
DBL561en | 1
st
Issue rev. c | 03/2022
MVE2xx-65
IP65 Globe Valves Actuators
MODEL
FORCE
[N]
POWER
SUPPLY
DESCRIPTION
MVE204-65
400
230 V AC ±
10%
Long yoke, modulating/
floating control, IP65
MVE206-65
600
MVE210-65
1000
MVE215-65
1500
MVE222-65
2200
MVE204S-65
400
230 V AC ±
10%
Short yoke, modula-
ting/
floating control, IP65
MVE206S-65
600
MVE210S-65 1000
MVE215S-65
1500
MVE222S-65
2200
APPLICATION AND USE
MVE2xx-65 is a flexible electro-mechanical actuator for the control of two and three way globe valves in:
• heating and cooling systems
• Air Handling Units
• district heating plants
• industrial temperature control systems.
MVE2xx-65 can be controlled either by a proportional (modulating)signal or by an increase/decrease (Floating) signal.
It is easy to mount and connect the actuator. Direct mounting is possible to any CONTROLLI flanged valve. Linkage kits are available
for iSMA CONTROLLI threaded valves as well as for valves of other manufacturers (table page 3).
The actuator has a fine resolution (500 steps on the full stroke range) for exacting fluid control and it is able to self-calibrate on a
different stroke without the need of any user action (this function is DIP switch selectable on the field).
MVE2xx-65 has intelligent behaviour and alarm functionality in case of unexpected operation, feedback of alarms to the user is pro-
vided by LEDs (GREEN and RED) on the control board.
N.B.: Do not use the actuator if not coupled with its relating valve.
MVE2xx-65 is suitable for harsh environment requiring IP65 protection degree.
TECHNICAL CHARACTERISTICS
DESCRIPTION
MVE204-65
MVE204S-65
MVE206-65
MVE206S-65
MVE210-65
MVE210S-65
MVE215-65
MVE215S-65
MVE222-65
MVE222S-65
Supply voltage F N
230Vac ±10%, 50-60Hz
Power consumption (running)
10VA / 4,5W
13VA / 6W
18VA / 8W
21VA / 11W
25VA / 10W
Power consumption (holding)
8VA / 4W
11VA / 5W
11VA / 5W
13VA / 7W
10VA / 4W
Running
time
Modulating
15 s (for valves with stroke from 5 to 15 mm)
60 s
(for valves with
stroke from 5 to
60 mm)
20 s (for valves with stroke from 15 to 25 mm)
30 s (for valves with stroke from 25 to 60 mm)
Increase/decrease
60 s
Stroke
5-60 mm (limited to 30 mm for MVE2xxS-65)
Force
400 N
600 N
1000 N
1500 N
2200 N
Duty cycle
max 50%/60 minutes
Analogue input Y M
voltage 0-10V - impedance > 100kΩ (range: 0-10Vdc, 2-10Vdc, 0-5/2-6Vdc, 5-10/6-10Vdc)
500 Ω (range 4-20mA)
Digital inputs Y1 Y2
connection of Y1, Y2 to M
