Intex PureSpa SSP-10 Owner'S Manual Download

Page: 1 / 17

192

(192PO) SPA ENGLISH 7.5” X 10.3” PANTONE 295U 04/18/2013

English

OWNER’S

MANUAL

PureSpa™

SSP-10

IMPORTANT

SAFETY RULES

Read, understand, and follow

all instructions carefully before

installing and using this product.

192-*PO-R1-1304

Do not forget to try these other fine Intex products: pools, pool

accessories, in-home toys, airbeds and boats available at fine

retailers or visit our website.
Due to a policy of continuous product improvement, Intex reserves

the right to change specifications and appearance, which may

result in updates to the instruction manual, without notice.

For illustrative purposes only.

IMPORTANT!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, visit

www.intexcorp.com

For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839

Monday through Friday, 8:30am to 5:00pm Pacific Time

Summary of Contents for PureSpa SSP-10


















Search results

Summary of Contents for PureSpa SSP-10

Reviews:

Related manuals for PureSpa SSP-10

Brands by name

Popular brands

Intex PureSpa SSP-10, Owner'S Manual

Search results

Summary of Contents for PureSpa SSP-10

Reviews:

Related manuals for PureSpa SSP-10

Brands by name

Popular brands