Before Installing
1.
Check the parts in both packages against the Parts Lists shown above. Contact Intermatic if parts are missing.
2.
It is suggested that you read these instructions completely before installing the Stand Alone Protection (SAP) unit.
Note: These modules rely on a good ground connection to function properly. Ground availability
should be a consideration when selecting an installation location.
Do not install Protection Devices during Electrical Storms.
I
NSTALLATION
I
NSTRUCTIONS
Telephone Indoor Stand Alone Protection
Flush Installation
Model Numbers:
Description:
IG2TM
2-line telephone protector with indoor enclosure (NEMA 1)
IG4TM
4-line telephone protector with indoor enclosure (NEMA 1)
Optional Modules
IG2T
2-phone line protection module
Models
SURGE PROTECTION
Description
Quantity
Reference
Mounting Frame
1
A
Cover / Back plate
1
B
IG2T (in Model IG2TM)
1
C
IG2T (2nd module in Model IG4TM)
1
D
Screws-self threading (3/8” Torx T20 / slot head)
2
E
Ground Wire
1
F
3/4” x 6 Pan Head Screws (
not shown
)
4
3/4” anchors (
not shown
)
4
Description
Quantity
Reference
Flush Mount Cover Plate
1
H
Mounting Bracket
1
J
Screws-self threading (3/8” Torx T20 / slot head)
4
K (Fig.4)
Screws-self threading (5/8” Torx T20 / slot head)
2
L
3/4” x 6 Pan Head Screws (
not shown
)
4
Parts List
Additional Parts
Flush Mount Kit
A
A
C
D
H
J
F
E
E
B
B
Flat head screw driver, Torx head
screw driver, Awl or hole punch, drill,
1/8” and 3/16” bits.
Tools Required
Notes:
1. Telephone protection is compatible with
Voice and Fax lines, Modem lines and
DSL (Digital Subscriber Lines.)
2. Coaxial protection is compatible with
Local antenna, Cable/Satellite and
Cable Internet lines.
Figure 2
Figure 1
L
