background image

EN-1

EN-2

SAFETY PRECAUTIONS

The lightning flash with arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous voltage

within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.

CAUTION

: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT RE-

MOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

ATTENTION

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

DANGER:

This product utilizes a Class 1 laser to read Compact Discs. This laser
Compact Disc Player is equipped with safety switches to avoid exposure
when the CD door is open and the safety interlocks are defeated. Invisible
and hazardous laser radiation when open and interlock failed or defeated.
Avoid direct exposure to beam. Please do not attempt to defeat or bypass
the safety switches.

WARNING:

This device complies with Part 15 of theFCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undes-
ired operation.

SURGE PROTECTORS:

DANGEROUS VOLTAGE

It is recommended to use a surge protector for AC connection. Lightning and power

surges ARE NOT covered under warranty for this product.

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates,uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning theequipment off and on, theuser

is encouraged to try to correct the interference by on or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced radio/TV technician for help.

SAFETY PRECAUTIONS (CONTINUED)

Do not open the CD compartment while the CD is rotating.
Always keep the CD compartment closed when not in use.
Keep all foreign objects out of the CD compartment.
Place the unit on a stable surface.
Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric

heaters.

On top of other stereo equipment that radiates too much heat.
Places lacking ventilation or dusty places.
Places subject to constant vibration.
Humid or moist places.

Summary of Contents for IS-PA040720








Reviews: