background image

EE4080 IP Gateway

Installation Instructions

6.5.19 357-06982-02 Rev A © Inovonics, 2019

1 Overview

The EE4080 IP gateway combines the functionality of an Inovonics 

receiver with the flexibility of an IP appliance, receiving EchoStream data 

and outputting messages directly to an IP-based application.

2 Installation

  1  

Review all installation instructions, as well as section 3, “Tips and 

Notes” on page 3, before beginning installation to ensure you are 

familiar with the process and have everything you need to install 

the IP gateway.

  2  

Record the following information for future reference:

• Record the appropriate MAC addresses from the label on the 

back of the housing. 

• Record the eight-character alphanumeric authorization code 

from the label on the lower right-hand portion of the printed 

circuit board, just above the Inovonics logo.

  3  

Use a Phillips screwdriver to open the IP gateway housing.

  4  

Use the included screws and drywall anchors to flush-mount the 

IP gateway.

  5  

Connect power to the IP gateway, routing cabling through the IP 

gateway housing knockout.

• If using line power, connect a power supply to the power 

terminal blocks per the power supply manufacturer's 

instructions. See section 5, “Specification” on page 3 for 

details.

• If using Power over Ethernet (PoE), connect one end of a 

RJ45 Ethernet cable to the RJ45 Ethernet jack, and connect 

the other end to a PoE capable network switch. Ensure 10/

100BASE-T Ethernet with Dynamic Host Configuration 

Protocol (DHCP) network management protocol.

  6  

If using line power, connect one end of a RJ45 Ethernet cable to 

a RJ45 Ethernet jack, and connect the other end to your LAN to 

establish Internet connectivity.

• Ensure 10/100BASE-T Ethernet and DHCP network 

management protocol.

 Note: 

Steps 7 through 12 are generic configuration instructions for the IP 

gateway. For instructions for your individual license, see the 

E*4080 IP Gateway Amazon Web Services MQTT Quick Start 

Tech Note 

or the 

E*4080 IP Gateway BACnet/IP Quick Start Tech 

Note 

available in the documentation library at www.inovonics.com.

Reviews: