H2O WITH SELF-LATCHING 9600
Sand
20 lbs
Sand
Contents of the ladder box SKU # 7000
Contents of the Self-Latching box SKU # 9600
(not included)
Wet side
(#7000)
Dry side
(#9600)
A
SCREW KIT 140-0010
x2
x2
x2
x1
(³⁄4
IN.)
x4
A
Required tools
(not included)
A weather-resistant padlock is
recommended.
Maximum functional
width of 1/4 inch.
Phillips #2
Phillips #3
7/16 wrench
Phillips bit
REV. 10/27/2020 PN:
PG:1
2257 route 139
Drummondville, Québec
J2A 2G2
1 year on step and closure.
1 year on hardware.
MANUFACTURER WARRANTY
WWW.INNOVAPLAS.COM
1)
Install the posts in the H2O step
as far as they go and secure in
place with the screws provided.
2)
Slide the platform onto the
posts but do not secure.
x4
A
Security straps
x2
x2
x2
(3/4 IN.)
x12
(2 1/2 IN.)
x2
SCREW KIT 140-0016
(2 1/2 IN.)
B
C
A D
x2
x4
x3
WARNING
Install the step on a flat surface.
Do not jump or dive from the step or ladder.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer’s instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
