Form MHD56298
• A copy of our “Safe Operating Practices” Manuals are always available free of charge either by downloading it from our
Technical Publications website @ www.airwinch.com or by contacting the Factory at (800) 866-5457 for North America and
(206) 624-0466 for International. The Safe Operating Practices manual must be read prior to anyone operating a
Ingersoll-Rand
winch or hoist. The manual form numbers are as follows:
“Safe Operating Practices Non-Man Rider™ Winches” Manual, Form No. MHD56250
“Safe Operating Practices for Man Rider™ Winches” Manual, Form No. MHD56251
“Safe Operating Practices for Pneumatic, Hydraulic and Electric Hoists” Manual, Form No. MHD56295
• Available winch options may require additional supplements to the basic winch manual.
• For Man Rider™ winches ensure a copy of the Man Rider™ supplement is made available to the operator prior to winch
operation.
• We strongly recommend that ALL maintenance on
Ingersoll-Rand
equipment be carried out by personnel certified by
Ingersoll-Rand
, or by
Ingersoll-Rand
Authorized Service Centers.
• Contact the Factory if in doubt about installation, operation, inspection and maintenance instructions.
• Use only Genuine
Ingersoll-Rand
parts when maintaining or repairing a winch, hoist or any component of a winch or hoist.
• ANSI / ASME recommends that a winch or hoist (or any components of a winch or hoist) that has been repaired be tested
prior to being placed into service:
Winch Man Rider
™
Supplements:
Model:
Publication No.
Model:
Publication No.
FA2, FA2.5,
FH2, FH2.5
MHD56046
LS500RLP
SAM0011
LS1000RLP
SAM0012
FA5
MHD56042 and
MHD56220
LS150RLP
SAM0082
LS150RLP/500/
1000
SAM0115
FA10
MHD56252
FA2.5A MHD56236
LS150RLP and
LS150PLP-PH
SAM0120
FA2B and
HU40A
MHD56207
LS500RLP-E
SAM0122
FH10MR
MHD56212
LS150RLP-
DP5M-F
SAM0184
Fulcrum Electric
MHD56277
LS500HLP/
LS1000HLP
SAM0004
LS150HLP
SAM0222
*
Winches -
ANSI / ASME B30.7 (BASE MOUNTED DRUM HOISTS) Refer to section 7.2.2 - Testing.
*
Hoists -
ANSI / ASME B30.16 (OVERHEAD HOISTS - UNDERHUNG) Refer to section 16.2.2 - Testing.
Form MHD56298
Edition 2
November 2004
71441844
©
2004 Ingersoll-Rand Company
IMPORTANT INFORMATION:
Summary of Contents for 10000B20
