![background image](http://html1.mh-extra.com/html/ingenico/move3500/move3500_quick-start-manual_2058864001.webp)
Quick Start Guide
Move3500
GETTING STARTED
Set up your charging base unit in a convenient location close
to a power source.
Your terminal will automatically pick-up the best available
mobile network. However, if required, you may manually select
a network in order for the terminal to always connect to a
selected provider. To change to ‘Manual Mode’ press
until
SYSTEM MENU is displayed. Choose ‘Select Function’ by
pressing
, or
then press
. Type in 91 and press
.
Press
again and terminal will scan for networks.
Select a network by pressing
or
then press
to
confirm selection.
Note
: Press and hold
and
together to turn the
terminal off (terminal needs to be off its base).
SUPERVISOR PASSWORD
The default supervisor password is 0000.
Please note
: The
terminal will require you to change this to a new code of your
choosing before you can process any transactions.
FUNCTION KEYS
Arrow keys
: Enable you to choose options on screen
F1 & F4 keys
: Are NOT used.
Menu key
: To enter the application menus press the Menu
key from the idle (READY) screen. Pressing the key again
moves to the next menu (if available).
Correction keys
: When entering numbers or letters, pressing
deletes one character at a time; while pressing
deletes
the entire line (this key also cancels transactions).
Confirmation key
: Pressing
is used to confirm
anything that has been typed into the terminal.
Paper feed key
: To test the feeding of the paper through the
printer press and hold
.
See page 4 for instructions how to change the paper roll.
Clear key
Cancel key
Menu key
Enter key
Arrow keys
F4
F1
Power
socket
Connecting the Base Unit
Terminal guides
Terminal charging
points
Paper feed key