ABOUT YOUR LINEA PRO PISTOL GRIP
CHARGING STATION (4-Unit)
ASSEMBLY
Linea Pro®
Pistol Grip Charging
Station (4-Unit)
for Linea Pro 5 and Linea Pro 6
Pistol Grips
QUICK START GUIDE
CHARGE STATUS
TROUBLESHOOTING
Note:
The Linea Pro Pistol Grip Charging Station is
designed specifically to charge both the Linea Pro
and the iOS device. However, the iOS device must
be installed properly in the Linea Pro for charging to
occur.
1.
Place charging station on a sturdy, clean
and dry surface in an open, well-ventilated
area away from direct sunlight.
2. Plug in the included DC barrel plug to the
DC port on the front of the charger. Next,
connect the AC power adapter to a power
outlet.
3. Insert the Pistol Grip into the charging bay
so that the cradle supports the front of
the Linea Pro sled. When the pistol grip is
seated correctly, the LED on the front of
the charger will turn green to indicate that
power is being supplied to the device.
The Linea Pro Pistol Grip Charging Station uses
the following LEDs to indicate the charge status:
STATUS INDICATOR LEDS
Green
Power is being supplied to the charger.
No LED
Indicates there is no device in charging bay or
there is no power supply attached the charger.
For device charging status, please refer to the
user documentation provided with your Pistol
Grip for Linea Pro 5 and 6 devices.
The LED does not come on when the Linea Pro
Pistol Grip is inserted into the charging station,
or the Linea Pro iOS device is not charging.
• Ensure that the DC barrel plug is securely
inserted into the DC port on the front
of the charging station and that the AC
power adapter is plugged into a working
power outlet.
• Ensure the unit is seated properly in the
charging bay.
It takes an excessive amount of time to fully
charge the battery.
•
Verify ambient temperature meets the
operating temperature requirements.
Operating: 0°C to +30°C (+32°F to +86°F)
Cradle
Charging Bay
LED Indicator
DC Jack Port
Front View
Back View
