Parts & Material Included
Parts and Materials
Tools & Parts Needed
■ Adjustable Wrench
■ Phillips Screwdriver
■ ¼” Nut Driver
■ 3/8” Nut Driver
■ Adapter from home pipe size
to 1” PVC if needed
Installation Requirements
■ properly tighten all fittings to ensure a leak-free assembly.
■ the system should be located after the connection to the sprinkler system(s), and/or irrigation
line(s). These lines should be left untreated.
■ Install in a location that is not susceptible to freezing temperatures as damage to the equipment
could occur. Do not install where there is prolonged exposure from UV lights.
■ Install away from direct sunlight as prolonged exposure to ultra violet light can weaken plastic
components.
Unit should be installed in a well-ventilated area to avoid buildup of any airborne pollutants.
3
O
2
Hydro Well System
Installation, Use &
Care Guide
4
1.
Main Control Head
2.
Funnel
3.
Drain Line
4.
Bypass Valve
5.
Silicone
6.
Distributor Tube Cap
7.
Power Cord Assembly
8.
Surge Protector
9.
Teflon Tape
10.
Strainer Basket
11.
Media Tank Distributer Tube
12.
Media Package
(Not Shown)
9
1
2
5
6
7
8
10
11
