Thank you for choosing the Mobile Broadband USB
Stick. With your USB Stick, you can access a wireless
network at high speed.
Note:
This manual describes the appearance of the USB Stick, as well as the procedures for
preparation, installation, and removal. For operation details about the management
program, see the online help included in the management program.
Getting to Know Your USB Stick
The following figure shows the appearance of the USB Stick. It is provided only for your
reference. The actual product may be different.
2
1
Rotatable USB Connector
It connects the USB Stick to a PC.
Indicator
It indicates the status of the USB Stick.
Red, blinking twice every 2s: The USB Stick is powered on.
Blue, blinking once every 2s: The USB Stick is registering with a 2G/3G/LTE network.
Blue, solid: The USB Stick is connected to a 2G/3G/LTE network.
Off: The USB Stick is removed.
SIM/USIM Card Slot
It holds a Subscriber Identity Module (SIM)/Universal Subscriber Identity Module (USIM)
card.
3
Getting Started
Installing the SIM/USIM Card
1.
Slide the front cover off.
2.
Insert the SIM/USIM card into the card slot.
3.
Slide the front cover back onto the USB Stick until it snaps into place.
Note:
Ensure that the beveled edge of the SIM/USIM card is properly aligned with that of
the SIM/USIM card slot.
Do not remove the SIM/USIM card when the card is in use. Otherwise, the card as
well as your USB Stick may get damaged and the data stored on the card may be
corrupted.
Installation/Removal Guide
The procedure for installing the management program depends on the operating system
(OS) installed on your PC. The following sections take Windows XP as an example.
Connecting the USB Stick to a PC
Plug the USB Stick into the USB port of your PC.
