Code 40977/8/85/6/9/94
Single and
Three Phase
Extension
Cables
14 metre, heavy duty 240V and 415V
extension cables for use with distribution
boxes and heavy demand equipment.
Operating & Safety Guide HW890
HW890/01
©HSS Hire Service Group Plc 2003 No. HW890/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Web Site: http://www.hss.com/hireweld
...any comments?
If you have any suggestions to enable us to improve
the information within this guide please fax your
comments or write to the Product Manager at the
address below
Fax: 020 8687 5001
EQUIPMENT CARE
Never push the equipment beyond its design limits.
If
it will not do what you want assume you have the wrong
type or size of cable for the job.
Ask at your local HSS Hire
Weld Depot for advice.
Keep the equipment clean.
You will find this less of a
chore if you clean it up regularly rather than wait until the
end of the hire period.
When not in use,
store the equipment somewhere
clean, dry and safe
from thieves and unauthorised users.
FINISHING OFF
Switch off any equipment being powered then
switch OFF the power supply. Disconnect all cables
and coil them up neatly
ready for return to your local
HSS Hire Weld Depot.
