GENERAL INFORMATION
COMPOSITION & SPECIFICATIONS
HR80-HW Setup Instructions
HR80-HW
Thank you for purchasing the dual purpose HR80-HW Wired Digital Door Key / Digital Touch Pad.
Unfasten the screw bolt,
and use a flat blade (
⊖
)screwdriver
to disassemble it,
as shown in the figure below.
Water proof pad (Silicone rubber)
Between outside gaps
Upper case
Screw bolt for
disassembling
/assembling
Lower case
Connection
wire hole
Mounting screws
Disassembling the upper case
HOTRON LTD.
unit : m/m
20
41
150
Wired Digital Door Key main body
Mounting screws (4x16)
Mounting template
Connection wire
1
2
1
1
User’s Manual
1 copy
Power supply
DC 12~30V, AC 12~24V
Relay contact capacity
Operating temp
Type
Power consumption
24V/1A
-20
℃
~50
℃
Password / Card
300mA Under
Card type / Frequency
ISO14443A(Mifare) / 13.56MHz
International Protection
IP54 (water proof)
Composition
Specification
DIMENSION
Water proof pad (Silicone rubber)
(When assembling the product,
the water proof pad should not be twisted)
HR80-HW DECLARATION OF CONFORMITY
We manufacturer, hereby declare that the product satisfies all the technical regulations applicable to the product within
the scope of Council Directives 2006/95/EC, 2004/108/EC and 99/5/EC:
Directives Fulfilled:
Radio : EN 302 291-1 V1.1.1 /-2 V1.1.1
EMC: EN 301 489-1 V1.9.2 /-3 V1.4.1
Safety: EN 60950-1: 2006+A11:2009+A1:2010+A12:2011
Description of Product:
Model: HR80-HW / Type:Digital Door Lock with card key for access control
Technology used is Capacitive Touch Switch and RFID
All essential radio test suites have been carried out.
Testing laboratory :
EMC Compliance Limited
Authorized representative or manufacturer :
Hotron., LTD.
26 Dublin Street, Carlow, Ireland.
Tel.
+353 (0)59 914 0345
/ Fax.
+353 (0)59 914 0543
Date :
Apr. 29, 2014
26 Dublin Street, Carlow, Ireland.
Tel:
+353 (0)59 914 0345
Fax:
+353 (0)59 914 0543
Email:
Web:
www.hotron.com
Hotron Ltd.
