17”
11”
Fold
Fold
Fold
Fold
EN | 4
Use and Care Guide
Read and Save this Instructions Before Use
EN
Model: BT0554FF0020
LED Indoor/Outdoor String Light
with Bluetooth Speakers
NOTE:
The Bluetooth brand elements may not be used in a fashion or manner
that could impair or otherwise damage the goodwill associated with the
Bluetooth brand or the Fellow Adopters (International Development Company).
The Bluetooth brand elements shall therefore not be used in connection
with products and services that do not enable any Bluetooth wireless
functionality or in connection with unlawful, obscene, pornographic,
excessively violent, hazardous,or otherwise poor-taste activities.
FCC WARNING:
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
**********************************************************************************************
NOTES:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
PROBLEM
Light will not come on.
A. Light not plugged into outlet.
B. Outlet not powered.
C. Bulb(s) not lighting
A. Plug power cord into outlet.
B. Check to make sure breaker is on
and test outlet with another working
electrical device to make sure it is
receiving power.
NOTE:
Unplug power cord first.
C1. Check to see if screw cap is tight.
If loose, hand tighten.
C2. If screw cap is tight: Unscrew cap,
remove bulb and re-insert bulb. Hand
tighten. If bulb is still not lighting,
contact customer service.
POSSIBLE CAUSE
SOLUTION
TROUBLE SHOOTING
Bluetooth audio does
not work.
Audio can be heard out
of first string light only
in linked chain.
A. Check to make sure aux cables
are properly installed on all
linked lights.
A. Bluetooth not active or not close
enough to device.
B. Bluetooth may be paired to wrong
device.
C. Device volume may be low or
muted.
A. Ensure your device's Bluetooth is
turned on, in range and
discoverable.
B. Make sure you are selecting the
correct device to pair to.
C. Makes sure your audio level is
set appropriately.
A. Aux Cords are not connected on
linked lights.
International Development Company
899 Henrietta Creek Rd. Roanoke,
Roanoke, TX 76262 USA
Toll-free: 1-877-723-0723
Made in China
© 2018 IDC, all rights reserved.
The Honeywell Trademark is used under license
from Honeywell International Inc.
Honeywell International Inc. makes no
representations or warranties with respect
to this product. This product is manufactured for
International Development Company.
HOW TO OPERATE BLUETOOTH SPEAKER:
Bluetooth Speakers will enter pairing mode when you turn on the light. Activate bluetooth on
your device and find device named BT0554FF0020. Press to pair.
The Bluetooth Speakers will turn off when the light is turned off.
1.
2.
65.6ft (20m)
Bluetooth Speakers
Aux Out
Aux In
For most reliable operation the distance between Bluetooth device and the string light should be less than
65.6ft(20m).
NOTE: Bluetooth performance can also be affected by Bluetooth device used and your individual environment
(i.e. clear line of sight between device and string light normally provides better performance than multiple
walls between device and string light).
