background image

ENGLISH

1

INTRODUCTION

Thank you for purchasing a Honda lawnmower!

This manual covers the operation and maintenance of the Honda 
HRS536SKEA lawnmower.

We want to help you get the best results from your new lawnmower 
and to operate it safely. This manual contains the information on how 
to do that; please read it carefully.

This manual should be considered a permanent part of the 
lawnmower and should remain with it if it is resold.

If you have a problem or questions concerning the lawnmower, 
contact your supplying dealer.

We recommend that you read the warranty policy to fully understand 
its coverage and your responsibilities of ownership. 

Honda Power Equipment Mfg., Inc. reserves the right to make 
changes at any time without notice and without incurring any 
obligation.

No part of this publication may be reproduced without written 
permission.

SAFETY MESSAGES

Pay special attention to statements preceded by the following words:

Each message tells you what the hazard is, what can happen, and 
what you can do to avoid or reduce injury.

DAMAGE PREVENTION MESSAGES

You will also see other important messages that are preceded by the 
following word:

The purpose of these messages is to help prevent damage to your 
lawnmower, other property, or the environment. 

CONTENTS

 DANGER

You WILL be KILLED or SERIOUSLY 
HURT if you don’t follow instructions.

 WARNING

You CAN be KILLED or SERIOUSLY 
HURT if you don't follow instructions.

 CAUTION

You CAN be HURT if you don't follow 
instructions.

NOTICE

Your lawnmower or other property can be 
damaged if you don’t follow instructions.

INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
SAFETY MESSAGES  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
COMPONENT IDENTIFICATION  . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
SET-UP  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
PRE-OPERATION CHECKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
OPERATION  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  7
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  10
TRANSPORTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13
STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  15
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  16
Honda Warranty Conditions, 
“EC Declaration of Conformity” CONTENT OUTLINE,
Major Honda Distributor Locations . . . . . . . . . . . . . . . . . .  . .Last pages

OWNER’S MANUAL

(Original instructions)

HRS536C4SKEA

PEDESTRIAN CONTROLLED 

LAWNMOWER

© 1997–2016 American Honda Motor Co., Inc.—All Rights Reserved

ENGLISH

FRANÇAIS

HPE.2016.03

E

S

P

AÑOL

C4

IT

ALIANO

NEDERLANDS

DEUT

SCH

00X39VG3 6550

PRINTED IN U.S.A.

Summary of Contents for HRS536C4SKEA









































































































Reviews: