Page 1 of 4
#84500111 H-BAR
INSTALLATION INSTRUCTIONS
Revised 10/11/11
Product Overview
The H-Bar ads utility and options to your Hobie Mirage Pro Angler kayak. Designed with the stand-up angler
in mind, the H-Bar not only provides standing stability, but a great support platform for entering and exiting
your kayak. Use the H-Bar to pull your self up and make a cast to that feeding fish. Made from clear-coated
anodized aluminum, the H-Bar is light, strong, and quiet so fish don’t spook. Mount accessories on the H-Bar
like fishfinders or rod holders or leave it clear for a stand-up paddling. Add a stripping basket to the front for
snag-free fly fishing. Cast further while you lean against the foam pad in comfort. Remove two pins and the
H-Bar folds away in seconds, leaving your front hatch and cockpit area fully accessible.
Parts
a. (4 qty.) Large Nuts
b. (4 qty.) Large Bolts
c. (8 qty.) Bolts
d. (8 qty.) Washers
e. (8 qty.) Nuts
f. Attachment Bungee® with Hook
g. (4 qty.) Mounting Brackets
h. H-Bar
Installation Instructions
There is an H-Bar installation video available on our YouTube channel (http://youtu.be/dpxsa5GDQTw)
STEP: 1
Attach the mounting brackets to the H-Bar frame using the pins. The protrusions of the mounting brackets should be facing up and
inwards. Lay the frame of the H-Bar with the mounting brackets attached on the mounting boards of the Pro Angler with the front of the
frame clearing the front hatch. This will provide you with a good idea of how the H-Bar will lie when it is in the down position.
