background image

    Tightening/loosening of small screws, tapping screws, wood screws, Teks screws, Hex screws, etc.
    Tightening/loosening of bolts, nuts, etc.
    Drilling into wood and other materials (with use of the optional accessory drill chuck adapter set)

PRODUCT NAME

Hitachi 10.8 V Cordless Impact Driver

Model  

WH 10DL

[ NEW FEATURES ]

Lightweight and compact body (139 mm in

length and 0.9 kg in weight)

Thin handle (comfortably fits in the palm of the

operator's hand)

Optimally balanced design with the center of

gravity maintained at the center of the grip

Powerful tightening torque 105 N

m

Battery level warning lamp

Multiple battery protection circuits for safety

Equipped with 10.8-V lithium-ion battery

Replaceable carbon brushes

The new cordless impact driver Model WH 10DL is equipped with the newly developed 10.8-V lithium-ion
battery. Features of the Model WH 10DL include the following.
(1) Easy to handle thanks to the most compact body in its class.
(2) Thin handle comfortably fits in the palm of the operator's hand.
(3) Optimally balanced design with the center of gravity maintained at the center of the grip (palm of the

operator's hand)

(4) Highest tightening torque in its class in spite of the compact body
(5) Battery level warning lamp
With the new Model WH 10DL, we aim to expand our market share.

LIST No. H802

Mar. 2008

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

International Sales Division

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

W

Summary of Contents for WH10DL
































Reviews: