background image

As current 38/43 mL chain saws do not comply with exhaust gas regulations, we are selling these products on
credit in North America and according to small-quantity production regulatory limits in Europe. Therefore, we
cannot expand the sales of such products. And in line with the trend toward targeting general users instead of
semiprofessionals for chain saws of the 40 mL displacement class, other companies have been releasing new
products with lower prices. To compete with this situation, we are releasing these two new models.

PRODUCT NAME

Hitachi Engine Chain Saw

Models

   

CS 40EA (S)

            CS 40EA (PS)

Sawing various types of lumber.
Examples of application:

• 

Forestry: Lumbering, cutting off tree branches.

• 

Gardening: Cutting off tree branches, pruning, trimming.

• 

Home use: Cutting firewood, rough cutting in do-it-yourself carpentry.

• 

Leisure: Cutting firewood at camping sites.

• 

Farm: Cutting firewood, preparing lumber for cultivating mushrooms, cutting off tree branches.

• 

Carpentry: Rough cutting or cast-away cutting of pillars, back slitting, cutting used lumber, cutting timber.

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

[NEW FEATURES]

New Pure Fire Engine (CS 40EA (PS))

Largest output in its class (CS

 

40EA (PS))

Low vibration

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

International Sales Division

C

   
LIST No.

CS 40EA (S) /
CS 40EA (PS): E079

Aug. 2010

Summary of Contents for cs 40 ea























Reviews: