background image

GIpro Mount

Instructions manual

Choose the proper shim

Insert the pin

Fasten the clamp

Disassemble the clamp. Separate the plastic shims 

and unroll the thin shim. Depending on the target 

tube diameter, select the right shim and place on the 

handlebar.

Slide the pin in place, making sure the threaded hole is 

aligned with the bolt hole.

Tighten the bolt with an 

M5 hex (Allen) wrench 

to secure the clamp on 

the bar in the desired 

position. 

Wind the arm around the target tube then close.  

If a plastic shim is used, rotate it into proper position.

Fully adjustable handlebar mount for GIpro

Place the clamp on the bar

w w w . h e a l t e c h - e l e c t r o n i c s . c o m

Thick

Thin

21-23mm (7/8”)  :   Thick Shim 

24-26mm (1”) 

:   Thin Shim 

27-29mm (9/8”)  :    Without Shim

Reviews: