background image

Service à la clientèle / Customer Service: 1-866-206-0888

Notre personnel du service à la clientèle est disponible pour vous aider. Pour obtenir de l’aide pour le montage de votre produit, pour signaler des

pièces endommagées ou manquantes, ou pour toute autre information, veuillez composer notre numéro sans frais: 1-866-206-0888.

Our Customer service staff is available to help you. For help with product assembly, to report damaged or missing parts, or for

any other information, please call our toll-free number: 1-866-206-0888.

Enregistrez votre produit

Nous vous invitons à enregistrer votre produit en ligne afin de faciliter les communications; pour ce faire, veuillez visiter le www.outilshaussmann.com

CONSERVEZ CE GUIDE

Vous aurez besoin de ce guide pour les règles de sécurité, le fonctionnement et la garantie. Conservez-le avec votre facture d'origine dans un endroit sûr au 

sec pour référence future. 

Register your product

We invite you to register your product online to make future communications easier. To do so, simply visit our website www.haussmanntools.com.

SAVE THIS MANUAL

You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future 

reference.

CLÉ À CHOCS SANS FIL

11

CORDLESS IMPACT WRENCH

H2T00LKIT-004

18v Ni-Cd 59595058

Summary of Contents for 59595058



















Reviews: