table of contents
Thank you for purchasing the Mechanical Lift. This manual tells you what you need
to know about operating this machine properly. Please read this manual carefully to
ensure safe and efficient operation.
Read these safety practices before installing, operating or servicing Lift Tables.
Failure to follow these safety practices could result in property damage, serious
IMPORTANT - If you do not understand the instructions, ask your supervisor to
teach you how to handle your question. Do not risk exposing yourself and/or others
to possible serious injury and/or death.
• For clarification about anything in this manual, please contact HAMACO Industries Corporation.
• Keep this manual in a convenient place for easy referral.
the lift is in good operating condition.
include, but not be limited to: OSHA approved eye, face, hand, feet and head protection.
Set up the lift on a level, stable cement surface. Never use on a slope.
Do not modify or alter the lift without consulting the manufacturer.
The power supply of this unit is for battery only.Please contact us if you want to use a switching
Select a battery for electric vehicles.Not for car.
Do not touch bellows and keep them away from fire and water.
Keep children away from machinery.
If you suspect any kind of product malfunction, contact the local distributor or
HAMACO Industries Corporation immediately
Working under the lift is extremely hazardous and dangerous.
DO NOT EVER WORK UNDER THE HAMACO LIFT WITHOUT A MAINTENANCE SAFETY DEVICE.
NEVER GO UNDER THE LIFT PLATFORM UNTIL THE LOAD IS REMOVED AND THE SCISSORS
MECHANISM IS SECURELY LOCKED IN THE OPEN POSITION.
NEVER STAND, SIT OR RIDE ON THE LIFT.
FAILURE TO FOLLOW THESE SPECIFIC INSTRUCTIONS MAY RESULT IN SERIOUS AND PERMANENT
SETTING UP AND USING THE HAMACO HYDRAULIC LIFT
PLEASE HAVE THE PERSONNEL WITH THE RELEVANT SPECIALIZED KNOWLEDGE AND SKILLS TO
PERFORM TRANSPORT, INSTALLATION, MAINTENANCE AND INSPECTION.
DO NOT USE IN AN EXPLOSIVE ENVIRONMENT.
DO NOT LIFT TABLE WITH LIFT CRANE OR BY HAND AT ANY TIME.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY, FIRE AND/OR
The Hamaco Lift has a maximum and minimum position and loading limit.
DO NOT ATTEMPT TO EXCEED THE MAXIMUM OR MINIMUM POSITION OR THE LOADING LIMIT.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY AND/OR DEATH.
The lift is not designed for welding operations.
DO NOT ATTEMPT TO PERFORM WELDING OF ANY TYPE USING THE LIFT.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS AND/OR
NEVER USE THE LIFT ON AN UNEVEN SURFACE.
KEEP YOUR HANDS AND FEET AWAY FROM THE MACHINEʼS MOVABLE PARTS.
DISTRIBUTE LOAD EVENLY AND NEVER OVERHANG EDGES TO AVOID IMBALANCE.
ALWAYS SET THE TABLE TO ITS LOWEST POSITION WHEN MOVING THE LIFT.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY AND/OR DEATH.
This machine is not waterproof.
DO NOT OPERATE IN AREAS WITH HIGH HUMIDITY OR MOISTURE.
WHEN PLACED IN AREAS THAT CAN BE EXPOSED TO RAIN OR SPRING
RUNOFF, SECURE A DRY AND SAFE SPACE WITH PLENTY OF DRAINAGE
AND EASY ACCESS FOR REGULAR INSPECTION.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN INJURY
NEVER LOAD MORE THAN ONE QUARTER (1/4) OF THE
LOADING CAPACITY ONTO THE LONG SIDE
LOAD CAPACITY IN THE SPECIFICATIONS TABLE ON THE
NEVER LOAD MORE THAN ONE HALF (1/2) OF THE LOADING
IN THE SPECIFICATIONS TABLE ON THE FOLLOWING PAGE.
DO NOT USE THE HAMACO LIFTS OUTDOORS OR IN PLACES THAT ARE DUSTY WITH HIGH
TEMPERATURES AND HIGH HUMIDITY. THE LIFT CAN BE RENDERED INOPERATIVE.
DO NOT USE THE HAMACO LIFTS IN FREEZING TEMPERATURES.
THE LIFT CAN BE RENDERED INOPERATIVE.
Ambient humidity: less than 85%
Altitude: lower than 3,280 feet
1. Plug the power cord into a power source
Red cord is plus pole. Blue cord is negative pole.
2. Press the “UP” foot switch to raise the lift.
3. Press the “DOWN” foot switch to lower the lift.
4. Release the foot switch to stop movement.
5. When the table reaches its upper or lower limit, the limit switch stops it
automatically. The second time the limit switch is triggered after the power
is turned on, the table decelerates and stops just short of that limit point.
Use with adequate margin to avoid exceeding maximum regulation usage frequency.
The electromagnetic brake makes a clicking sound as it opens and closes during table height
be careful not to exceed their limits to avoid damage.
‒ Ascent side current detected. This can be caused by an overload, upper limit switch defect,
excess current through the motor when the table was rising, or other reasons.
‒ Descent side current detected. This can be caused by an overload, lower limit switch defect,
‒ Ascent defect (did not go up for some reason)
‒ Descent defect (did not go down for some reason)
‒ Limit switch abnormality (the upper and lower limit switches come ON at the same time due to
‒ Sensor abnormality (hall sensor abnormality).
Repeat ‒ foot switch abnormalities (when the power is first turned on,
Alarms 1‒4: Press down the opposite side foot switch.
Alarms 5 and 6: Turn off the power.
Please consult manufacturer before performing any modifications or alterations.
(Use the connection wiring diagram on the following page for reference.)
Please consult manufacturer before performing any modifications or alterations.
(Use the connection wiring diagram on the following page for reference.)
Always input with dry contacts.
(Input from not a voltage contact but non-voltage contacts, such as a transistor point of contact. )
DO NOT OPERATE UNTIL THE LED LIGHT ON THE BOARD TURNS COMPLETELY OFF
Maintenance and Inspection Safety
Please note that stoppers, vises, and other tools necessary for maintenance are
1. Remove any load from the table
2. Raise the table at least half way.
If the table has bellows, either remove the four screws on
the table side and take down the bellows or roll up from the
3. Engage two stoppers (block)
arm rollers, then fasten securely with a vise
end of the arm support shaft side, then fasten
DO NOT HOIST TABLE WITH LIFT CRANE OR OTHER EQUIPMENT.
FAILURE TO FOLLOW THIS INSTRUCTION MAY RESULT IN SERIOUS INJURY
DO NOT TOUCH THE CONTROL BOX BOARD FOR AT LEAST FIVE SECONDS AFTER POWERING
DOWN TO ALLOW ELECTRICITY TO FULLY DISCHARGE.
FAILURE TO FOLLOW THIS INSTRUCTION MAY RESULT IN ELECTRICAL SHOCK.
BEFORE REMOVING MOTOR, TAKE PROPER PRECAUTIONS TO PREVENT
Unlike a hydraulic lift, the table will drop immediately without support.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY AND/OR DEATH
Please perform daily inspections in addition to more thorough periodic inspections
If daily inspection were to find an abnormality, immediately stop operation, find the cause and
Continued use without repair may render the lift inoperable.
Is there anything abnormal in lift rise or descent operation?
Are there any obstructions in the surroundings?
Is anything abnormal about the unitʼs appearance?
Are there any abnormal sounds or heat generation?
Periodic Inspections (monthly, quarterly and annually)
Are there any damaged or loose bolts, nuts or other parts at any connecting sections?
Is there abnormal wear in any moving sections?
Are there any cracks or damages at welded sections?
Are there any cracks or damages in the electrical wiring?
Check and apply roller chain lubrication at periodic inspection.
Check the dry cylinder gear and ball screw sections annually.
lubrication. However, once per year, overhaul them or replace the dry cylinders with new ones.
IF MAINTENANCE PROBLEMS PERSIST CALL THE LOCAL DISTRIBUTOR OR HAMACO INDUSTRIES
CORPORATION WITH THE SERIAL NUMBER OF THE SPECIFIC EQUIPMENT TO ORDER THE
1. The warranty period is one year from the date of delivery.
occurs and HAMACO Industries Corporation recognizes the defect, HAMACO Industries Corporation will
3. Even within the warranty period, there will be a charge for the following:
Repairs required due to breakdown or damage caused by
Repairs required due to breakdown or damage caused by
Repairs required due to breakdown or damage recognized as having been caused by an
Repairs required due to breakdown or damage caused by
inadequate assembly or installation
Consumables such as bearing lubricant, hydraulic oil, lubricating oil, etc.
4. The warranty is not valid if the machine is used outside United States.
Summary of Contents for ML-150-45V-D12
Page 3: ...WARNING LABEL PLACEMENT...
